March 19, 2024, 08:06:20 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: impossible to update  (Read 1849 times)

nicoco59

  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
impossible to update
« on: September 25, 2019, 12:22:50 am »
Hi everyone!

I just bought my microfreak today.

As i wanted to control it with my digitakt, i've plugged them together
but i wasn't able to send any program change from the digi to the Microfreak.

It appears to be due to the firmware 1.05 already installed not taking care of Program Change.

So i decided to update to the latest firmware. Unfortunately when i try to update with the latest firmware,
or midi control center shut down, or i receive an error message saying " error during the burning process, file corrupted/blabla"
or saying "problem with updater ..." .

Anyway... Any help? did someone experienced the same problem?

Thanks

nicoco59

  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: impossible to update
« Reply #1 on: September 25, 2019, 12:55:21 am »
ok guys, after few times reinstalling midi control center, verifying everything, etc,
It finally works after rebooting my computer a last time, then the midi control center decided to find the update
file by himself on the web and finally get the process correctly done.
And now program change works!!!!!!

Happy!

JulianR

  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: impossible to update
« Reply #2 on: September 25, 2019, 03:46:26 pm »
Lucky I've already burned two (2!) of them by following the update procedure provided by Arturia! Who says better?

Veinard, j'en ai déjà cramé deux (2!) en suivant la procédure de mise à jour fournie par Arturia ! Qui dit mieux ?

JulianR

  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: impossible to update
« Reply #3 on: September 25, 2019, 05:01:13 pm »
En ce qui me concerne, cette machine est bien partie pour finir dans la catégorie "Grosse bouse qui ne tient pas ses promesses"…
As far as I'm concerned, this machine is well on its way to finishing in the "Bullshit, that doesn't keep his promises" category…

Edouard_Arturia

  • Product Manager
  • Administrator
  • Sr. Member
  • *****
  • Posts: 427
  • Karma: 51
Re: impossible to update
« Reply #4 on: September 25, 2019, 05:39:25 pm »
Hey guys.

This article may help !!!

https://www.arturia.com/faq/installation/firmware-reset-and-detection-of-a-midi-device

If not, please try on a Windows computer, as the firmware update on Mac can sometimes tricky.

Best

Edouard
DGDGDGDGDG

JulianR

  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: impossible to update
« Reply #5 on: September 26, 2019, 05:54:38 pm »
 :D Plantage réparé, Firmware à jour (1.1.2.390) !
À moi les ProgramChange et un usage entier du MiiiicrooooFreeeaaaak !
J'ai même récupéré les presets utilisateur précédemment créées.

Merci à Léo du service support d'Arturia qui m'a indiqué rapidement une procédure via le Bootloader mode*, laquelle a fonctionné au second essai. Les capacités variables des ports USB intégrés aux macs sont peut-être responsables, ainsi, peut-être, que le MCC parfois instable sous mac 10.11.6

Pour info :
J'ai utilisé l'alimentation externe fournie pour réaliser la MàJ du firmware, peut-être est-ce nécessaire, peut-être pas…
J'ai enlevé du mac tous les périphériques, tous types de connecteurs inclus (Firewire, vidéo second écran, et bien sûr USB).

Bémol : proposer à un utilisateur Mac de trouver un Windows pour pallier à ces défaillances est un peu ubuesque…
Dièse : lorsque, comme moi, on recherche un patch 100% machines pour éviter les tracas informatiques, c'est un peu dommage de construire du hardware qui dépend pour quelques fonctions ou réglages d'un logiciel externe ; le plug'n play c'est trop oldschool ?
Point d'orgue : malgré tout ça, les qualités sonores du MicroFreak récompensent le temps investit dans ces réglages.

* pour info, le Bootloader mode du MicroFreak est accessible via la pression des 3 touches SHIFT + ARP + OCT à l'allumage de la machine.

TLW

  • Apprentice
  • *
  • Posts: 13
  • Karma: 0
Re: impossible to update
« Reply #6 on: September 28, 2019, 10:07:03 pm »
If not, please try on a Windows computer, as the firmware update on Mac can sometimes tricky.

So I’m supposed to spend two or three times - or more - the price of the very buggy synth on a Windows PC just to get Arturia’s own software to reliably work with it?

Not good.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines