March 29, 2024, 11:05:28 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Can't update - Midi Control Center doesn't recognize  (Read 2256 times)

GlennVS

  • Apprentice
  • Apprentice
  • *
  • Posts: 13
  • Karma: 0
Can't update - Midi Control Center doesn't recognize
« on: September 23, 2019, 08:27:57 pm »
First I open MCC and BSP is connected linked to MCC (recognized).
Then I press 'update' , select the .led file.
Then MCC asks to turn off BSP then on.
I press OK when ready, then I get message that device is not recognized.

I use a USB C to USB cable for macbook pro 2018. Maybe that's seen a a hub? But even when disconnecting and reconnecting that, it doesn't work.
BSP stays in UPD mode.

megamarkd

  • Hero Member
  • *****
  • Posts: 835
  • Karma: 38
  • Dead By Dawn
Re: Can't update - Midi Control Center doesn't recognize
« Reply #1 on: September 24, 2019, 10:57:07 am »
There has been several thread created about running MCC on a Mac and them not detecting the hardware.  I know there was one where a solution was found, so maybe try a searching the BSP and KeyStep boards for the thread?  I can't remember then thread subject or the member who started it, but I'm pretty sure they added "solved" to the subject.
Currently running https://www.modulargrid.net/e/racks/view/1311723 / www.modulargrid.net, sequencing with KSP and recording with a Zoom (no DAW involved, for better or worse ;) )

GlennVS

  • Apprentice
  • Apprentice
  • *
  • Posts: 13
  • Karma: 0
Re: Can't update - Midi Control Center doesn't recognize
« Reply #2 on: September 24, 2019, 07:21:10 pm »
I already searched before posting this

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Can't update - Midi Control Center doesn't recognize
« Reply #3 on: September 24, 2019, 10:31:59 pm »
Hi
What computer are you on? 
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

GlennVS

  • Apprentice
  • Apprentice
  • *
  • Posts: 13
  • Karma: 0
Re: Can't update - Midi Control Center doesn't recognize
« Reply #4 on: September 25, 2019, 09:20:30 pm »
Macbook Pro 2018
OSX 10.14.6
And I use a USB-C to USB-A cable

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Can't update - Midi Control Center doesn't recognize
« Reply #5 on: September 25, 2019, 10:26:01 pm »
Did you try the deterring of the midi driver in audio midi setup.
then plugging back in the BSP. and when you do you should see a new driver appear. that is highlighted. This means its connected.
Also check your about mac system report and the usb to see if the bsp is being seen by the mac. if not you have an issue either with the bsp or cable.
if the update process doesn't work first time reboot your mac and try again.

Hope this helps
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

GlennVS

  • Apprentice
  • Apprentice
  • *
  • Posts: 13
  • Karma: 0
Re: Can't update - Midi Control Center doesn't recognize
« Reply #6 on: September 26, 2019, 06:14:29 pm »
I see the BSP in the Audio/MIDI configuration when it's connected.
But I can't find any drivers for it under HD/Library/Audio/MIDI drivers.
So I don't know how to delete it.

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Can't update - Midi Control Center doesn't recognize
« Reply #7 on: September 26, 2019, 10:47:17 pm »
Hi
The driver is in the audio midi setup which is in utilities there you can see beatstep pro just click on that and press delete
Try that then reconnect the Bsp
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

GlennVS

  • Apprentice
  • Apprentice
  • *
  • Posts: 13
  • Karma: 0
Re: Can't update - Midi Control Center doesn't recognize
« Reply #8 on: September 27, 2019, 06:48:41 am »
It's Solved.

The BSP in update mode was recognized in Audio MIDI configuration. But as a generic MIDI device, not as a BSP.
I needed to delete the generic device (not the BSP device).

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines