September 27, 2020, 07:57:44 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News:

Arturia Forums



Author Topic: Control output volume by midi CC  (Read 259 times)

csurieux

  • Apprentice
  • *
  • Posts: 11
  • Karma: 0
Control output volume by midi CC
« on: July 07, 2020, 02:00:38 pm »
It would be nice to be able to control volume by sending midi CC from an expression pedal, just as we do for other contructors and using the traditionnal CC 7 for this (Waldorf, Elektron, etc. do this).
Problem is Microfreak midi implementation does not respect standards...
May be some reorganization in next firmware could be welcome for CCs.

EDITED TO REMOVE PAN as this device is MONO ...
« Last Edit: September 02, 2020, 08:35:35 am by csurieux »

BLEO

  • Apprentice
  • Apprentice
  • *
  • Posts: 26
  • Karma: 0
    • The dUmmydroMe
Re: Control output volume and pan by midi CC
« Reply #1 on: July 08, 2020, 02:43:00 pm »
You can't pan a mono output.

csurieux

  • Apprentice
  • *
  • Posts: 11
  • Karma: 0
Re: Control output volume and pan by midi CC
« Reply #2 on: July 11, 2020, 11:30:34 am »
You can't pan a mono output.
You are right, the small thing is mono, :( so lets have just output volume control.
I was requesting same functionality as in my very old Waldorf ....

ShapedNoise

  • Jr. Member
  • **
  • Posts: 52
  • Karma: 0
  • Hi all!
    • Kirke Godfrey
Re: Control output volume and pan by midi CC
« Reply #3 on: July 14, 2020, 04:01:41 am »
ITS MONO !
and the midi implemention is a MESS but YES but would be great if CC 7 (vol) or perhaps CC11(expression) were implemented.


It would be nice to be able to control these parameters by send midi CC from an expression pedal, just as we do for other contructors and using the traditionnal CC 7 and 10 for this (Waldorf and Elektron do this).
Problem is Microfreak midi implementation does not respect standards...
May be some reorganization in next firmware could be welcome for CCs.
Stay Safe.

 

Carbonate design by Bloc
SMF 2.0.13 | SMF © 2016, Simple Machines