March 28, 2024, 12:15:53 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: [SOLVED] Neither firmware update nor MIDI Control Center work.  (Read 5482 times)

svmcwd

  • Jr. Member
  • **
  • Posts: 54
  • Karma: 1
    • https://steppenwolfvonmensch.bandcamp.com/
Trying since at least an hour to update the firmware of my Drumbrute Impact and to get it to work with the bloody MIDI Control Center without any success. What magic ritual is needed to get them to work the way they should? I'm on OS X 10.9.5 and already tried deleting all obsolete devices from the Audio-MIDI-Setup, checked connections etc., but absolutely nothing helps. Updating via SysEx doesn't seem to be possible either, as the update file is in an different format. What to do?
« Last Edit: August 28, 2018, 07:47:34 am by I grec »
Veganism rules.

svmcwd

  • Jr. Member
  • **
  • Posts: 54
  • Karma: 1
    • https://steppenwolfvonmensch.bandcamp.com/
Re: Neither firmware update nor MIDI Control Center work.
« Reply #1 on: August 25, 2018, 04:54:35 pm »
Well, after using a shorter USB cable, deleting everything MIDI related from the Audio-MIDI-Setup and giving the MIDI Control Center a really very long time for every step to take action things finally worked. It's like the Impact and the MIDI Control Center communicated through an very old dial-up modem instead of an USB port.
Veganism rules.

I grec

  • Firmware Wizard
  • Administrator
  • Sr. Member
  • *****
  • Posts: 436
  • Karma: 24
Re: Neither firmware update nor MIDI Control Center work.
« Reply #2 on: August 27, 2018, 10:17:27 am »
Hi svmcwd,
Do you use an USB hub?

Regards,
Y.

Germain.arturia

  • Administrator
  • Sr. Member
  • *****
  • Posts: 373
  • Karma: 23
  • arturia test team
Re: Neither firmware update nor MIDI Control Center work.
« Reply #3 on: August 27, 2018, 11:04:34 am »
Hi svmcwd,
as colleague I grec said, it could be useful to know if you were using a USB hub.
In the meantime, please not that osx 10.9 is no more officially supported by our software products.
Anyway, i did a check on a mac mini with osx 10.9.
when plugging the DBI on a powered USB hub, the DBI wasn't recognized, nor by MIDI control center, nor by MIDI studio.
Plugging it directly on mac usb ports solved the issue.
After this , when plugging it again on a USB hub went fine.
hope this helps,
cheers,

svmcwd

  • Jr. Member
  • **
  • Posts: 54
  • Karma: 1
    • https://steppenwolfvonmensch.bandcamp.com/
Re: [SOLVED] Neither firmware update nor MIDI Control Center work.
« Reply #4 on: August 28, 2018, 03:28:11 pm »
Hi, I don't use a USB hub, it was as described without using a hub. Also I'm on a Macbook from 2008 which otherwise works just fine with the OS it has now, it'd be great if a hardware synth product, which usually should allow to change all of those settings without needing an extra OS dependent software, doesn't become an issue in this context. I fail to understand why all those MIDI Control Center settings can't be changed within the hardware itself in first place, and I wouldn't have bought any Arturia product anymore if I knew it was that OS dependent at basics.
Veganism rules.

svmcwd

  • Jr. Member
  • **
  • Posts: 54
  • Karma: 1
    • https://steppenwolfvonmensch.bandcamp.com/
Re: [SOLVED] Neither firmware update nor MIDI Control Center work.
« Reply #5 on: August 28, 2018, 03:30:44 pm »
I should mention I tried to use a roughly 3m long USB cable first, maybe that was an issue. It never was an issue with other music hardware devices tho.
Veganism rules.

Made In Breizh

  • Newbie
  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: [SOLVED] Neither firmware update nor MIDI Control Center work.
« Reply #6 on: October 04, 2018, 06:38:57 pm »
Hello,

Arturia website has a bug on firmware 1.0.9.366: the file downloaded is only a 47 Bytes today on October 4th.
47 bytes is not enough for a firmware, it is probably not enough even for the firmware header, and the size of the previous firmware file was 300KB.
Please update the file on your web server.

Thanks,
--------------

Bonsoir,

Le site web Arturia dysfonctionne sur le firmware 1.0.9.366: le fichier en téléchargement ne pèse que 47 octets aujourd'hui 4 Octobre 2018. 47 octets ne suffisent pas pour un firmware, ce n'est probablement pas suffisant même pour l'entête du fichier, et pour comparaison le précédent firmware pesait 300 Ko.
Veuillez mettre à jour le fichier sur votre serveur.

Merci

Germain.arturia

  • Administrator
  • Sr. Member
  • *****
  • Posts: 373
  • Karma: 23
  • arturia test team
Re: [SOLVED] Neither firmware update nor MIDI Control Center work.
« Reply #7 on: October 05, 2018, 08:50:03 am »
Hi everyone,
thanks made in breizh for the warning.
Indeed, there has been a bug while uploading the firmware on the server.
it will be fixed today.
I'll repost once everything's back in order.

best regards,

Darkside

  • Newbie
  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: [SOLVED] Neither firmware update nor MIDI Control Center work.
« Reply #8 on: October 08, 2018, 08:36:47 am »
Hi. Interestingly enough, the new firmware is probably still buggy, as on my unit the roller/looper stopped working after the update. Fortunately it was possible to switch back to the older version and it fixed the "broken" touch strip. Hopefully all will be good one day, so I sincerely wish happy coding to nice folks at Arturia.

Germain.arturia

  • Administrator
  • Sr. Member
  • *****
  • Posts: 373
  • Karma: 23
  • arturia test team
Re: [SOLVED] Neither firmware update nor MIDI Control Center work.
« Reply #9 on: October 08, 2018, 09:43:43 am »
HI everyone,
indeed this firmware is buggy on some units. It will be removed from website asap. we'll release a new firmware + mcc version this week.

When encountering this "dead touchstrip" issue, you have to perform a factory reset, but be sure to have exported your patterns first, as every pattern will be erased.
So after having everything backed up in midi control center, unplug your Drumbrute impact, power it off.
To perform a factory reset , hold song+bank+ptrn buttons while powering up the unit.
Then you have to reload your patterns using Midi control center.
Sorry for the inconvenience.

Cheers,

Germain.arturia

  • Administrator
  • Sr. Member
  • *****
  • Posts: 373
  • Karma: 23
  • arturia test team
Re: [SOLVED] Neither firmware update nor MIDI Control Center work.
« Reply #10 on: October 16, 2018, 09:30:34 am »
Hi everyone, at last, a new firmware + midi control center versions are out!
you can get these here : https://www.arturia.com/support/updates&manuals

cheers,

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines