August 22, 2019, 09:41:33 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News:

Arturia Forums



Author Topic: Option to disable the octave button flashing  (Read 1128 times)

puremusic

  • Apprentice
  • Apprentice
  • *
  • Posts: 19
  • Karma: 0
Re: Option to disable the octave button flashing
« Reply #15 on: March 02, 2019, 07:49:40 pm »
The Internet sure helps a person's electronic's education!

Roland FP-90 - Touchkeys - TEC BC - MIDI Expression
Kontakt - Arturia Piano V - Sonivox Eighty-Eight - Spitfire Symphony Orchestra

whitepianos.blogspot.com

gphantom

  • Full Member
  • ***
  • Posts: 136
  • Karma: 2
Re: Option to disable the octave button flashing
« Reply #16 on: March 04, 2019, 04:55:54 pm »
As for the micro USB cable, I have the Keylab Essential and, although it uses a USB A connection, I have a USB extender cable and I simply disconnect the female part so that once the cable is no longer working, simply replace the extension USB cable which will be done once every year or two.

fungus

  • Apprentice
  • *
  • Posts: 18
  • Karma: 0
Re: Option to disable the octave button flashing
« Reply #17 on: March 05, 2019, 08:36:07 pm »
The Internet sure helps a person's electronic's education!

The keystep is quite simple hardware on the inside, just the STM32F103 CPU and a few basic peripheral chips. ;)

It would be cool to reverse engineer it and make a new open-source firmware.

I'd have one of the rotary switches to select the octave, the 'Tempo' knob as a MIDI controller and the four buttons above the pitch/mod strips as pads. We could keep the sequencer, that seems useful but I'm not a big fan of arpeggiators.
« Last Edit: March 06, 2019, 05:04:57 pm by fungus »

morphik

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Option to disable the octave button flashing
« Reply #18 on: July 18, 2019, 09:22:15 am »
The Internet sure helps a person's electronic's education!

The keystep is quite simple hardware on the inside, just the STM32F103 CPU and a few basic peripheral chips. ;)

It would be cool to reverse engineer it and make a new open-source firmware.

I'd have one of the rotary switches to select the octave, the 'Tempo' knob as a MIDI controller and the four buttons above the pitch/mod strips as pads. We could keep the sequencer, that seems useful but I'm not a big fan of arpeggiators.
Well maybe reverse engineering isn't needed. I found this page  https://idyl.io/arduino/how-to/program-stm32-blue-pill-stm32f103c8t6/ explaining how to program a STM32 with the Arduino IDE, so you could just write your own code (and release it to the public domain  :) ). Note that you need the 1.6.5-r5 IDE in order to be able to use other than 'official' boards.

jaytee

  • Apprentice
  • Apprentice
  • *
  • Posts: 12
  • Karma: 0
Re: Option to disable the octave button flashing
« Reply #19 on: July 19, 2019, 09:03:14 pm »
Just adding to the chorus here. Would love a different option. Im using CV/gate, and if I want to play any bass, I have to have a bright blinking light going at all times. I may do the hardware mod listed above to just kill those LEDs but it would be nice to just get a software update.

puremusic

  • Apprentice
  • Apprentice
  • *
  • Posts: 19
  • Karma: 0
Re: Option to disable the octave button flashing
« Reply #20 on: August 09, 2019, 10:52:09 pm »
The good news is I just downloaded the latest updates and found an option at the bottom of the MIDI Control center to dim the LEDs. :D

Hurrah!

The bad news is that the octave buttons still flash and I don't see any option to disable that still.
Roland FP-90 - Touchkeys - TEC BC - MIDI Expression
Kontakt - Arturia Piano V - Sonivox Eighty-Eight - Spitfire Symphony Orchestra

whitepianos.blogspot.com

jimlapbap

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: Option to disable the octave button flashing
« Reply #21 on: August 16, 2019, 08:05:42 am »
Created an account here just to chime in. I bought this today. I wasn't sure about this product at first but willing to give it a chance, but the flashing is what put me over the edge, and since it looks like there's no solution to the flashing, I'm going to return it tomorrow.

gphantom

  • Full Member
  • ***
  • Posts: 136
  • Karma: 2
Re: Option to disable the octave button flashing
« Reply #22 on: August 16, 2019, 06:08:47 pm »
I don't get it.   People get upset over a flashing light which is supposed to let you know which octave you're in.  The latest firmware update let's you dim down to 10% brightness which is barely on.  If you want to get rid of a great product because of a flashing light, get an 88 key keyboard and you won't get an octave button at all...  Although, it wouldn't have a sequencer or arpediator... Maybe you can get such a keyboard at a nice price of -  Let's see, a yamaha 88 key workstation MODX8 goes for 1800.00, a yamaha Montage for 4000.00 etc etc etc...  Or you can use a 1.00 electrical tape roll and tape it on your offensive light.  On the other hand, just return the product and go for that nice 2,000.00 (U.S. Funds) keyboard and then find something to complain about it....

One man's opinion

MajorFubar

  • Sr. Member
  • ****
  • Posts: 284
  • Karma: 5
Re: Option to disable the octave button flashing
« Reply #23 on: August 17, 2019, 11:42:38 pm »
Created an account here just to chime in. I bought this today. I wasn't sure about this product at first but willing to give it a chance, but the flashing is what put me over the edge, and since it looks like there's no solution to the flashing, I'm going to return it tomorrow.
Read the post above yours which explains there is now a facility to dim the light to 10%
If a flashing light is pushing you 'over the edge' I'm not sure how you cope with real life.
2011 iMac 27" 2013 MBP 13" V Collection 6 Analog Lab 4 KeyLab 88 KeyLab 49 KeyStep

 

Carbonate design by Bloc
SMF 2.0.13 | SMF © 2016, Simple Machines