April 25, 2019, 05:53:44 am
Welcome, Guest. Please login or register.
Did you miss your activation email
News:

Arturia Forums



Author Topic: Arturia Minilab MK2 Pitch Bend Strip stop working  (Read 774 times)

Perkedel

  • Newbie
  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Arturia Minilab MK2 Pitch Bend Strip stop working
« on: July 21, 2018, 05:56:23 pm »
Hi everyone,

I need a little bit of help on this matter. I have used my MinilabMk2 roughly about 4 months and I don't really have any problem.
I have encountered this Pitch Strip problem before when I was just setting up my MinilabMk2 for the first time, but somehow after a couple hour of tweaking, it's started working. But, right now the Pitch Strip has stopped working again. The Mod Strip is still working though and everything else works fine.

Anyone ever encountered the same problem?

Thanks in advance for any help given.

ben arturia

  • Administrator
  • Hero Member
  • *****
  • Posts: 811
  • Karma: 31
Re: Arturia Minilab MK2 Pitch Bend Strip stop working
« Reply #1 on: July 25, 2018, 01:11:16 pm »
Hi Perkedel,

Sorry to hear that !
Looks like an hardware problem. You'd better contact support. They will help you on that point.

Have a nice day
.......testing.......

etoikla11

  • Newbie
  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: Arturia Minilab MK2 Pitch Bend Strip stop working
« Reply #2 on: November 28, 2018, 07:31:30 am »
hi men i just have the same problem and i just reset the controler holding (oct-)+(oct+) then unplugg the controler and plugged again. waith for 2 seconds and release the oct bottons. thats all... now its working again!
hope it works for you to!
good luck!

chakko

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 0
Re: Arturia Minilab MK2 Pitch Bend Strip stop working
« Reply #3 on: February 06, 2019, 03:44:37 pm »
I think this is a general issue. Every 7th or 8th time i plug in the MiniLab mk2, the pitch bend strip doesn't work, or send MIDI messages at all. Also, even if it is working, the Arturia MIDI Control Center doesn't switch to the Pitch bend control, when you apply it, even though MIDI messages are sent.

 

Carbonate design by Bloc
SMF 2.0.13 | SMF © 2016, Simple Machines