March 29, 2024, 02:31:00 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Wurli V2 Sustain After Update  (Read 5111 times)

brian1984

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Wurli V2 Sustain After Update
« on: May 29, 2018, 12:44:32 am »
Hello all,

I want to ask about a recent update.  I used to have a variable sustain pedal in my Wurl V2 but now it is completely off or on.  Do you all have the same?

I used to love the variable sustain.

Brian

LBH

  • Hero Member
  • *****
  • Posts: 4.920
  • Karma: 261
Re: Wurli V2 Sustain After Update
« Reply #1 on: May 29, 2018, 01:21:58 am »
Hi and welcome to Arturia forums.

What do you mean by "variable" sustain? A sustain pedal is a on/ off control.

brian1984

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Wurli V2 Sustain After Update
« Reply #2 on: May 29, 2018, 02:57:37 am »
I used to be able to have the sustain pedal 0%, 25%, 75%, 100% pressed etc.  I would click with my mouse and move it up and down to variable positions vs just On or Off.  It used to be able to have variable positions almost like a wah pedal so I could implement just a bit of sustain at a time.

LBH

  • Hero Member
  • *****
  • Posts: 4.920
  • Karma: 261
Re: Wurli V2 Sustain After Update
« Reply #3 on: May 29, 2018, 05:13:41 am »
Okay - you mean the feature that you could use as long as you did'nt use your hardware pedal to control sustain?
It's only on/ off now yes. I don't know when it was removed, or if it's intended it's not there anymore. In Wurlitzer V you could set from 0.00-100.00%, and then get a fixed sustain (on/off) period for each played note. But it only worked until you used your hardware sustain pedal. I don't know if it responded to a hardware expression pedal to set the value. The feature could be of some usage.

The feature is in Stage-73 V. So it could be a bug, that it's not in Wurli V2.
« Last Edit: May 29, 2018, 05:18:05 am by LBH »

brian1984

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Wurli V2 Sustain After Update
« Reply #4 on: May 29, 2018, 06:43:50 pm »
Okay so it was removed.  Guess I should submit a bug report to hopefully get that feature back for Wurli V2.  Thanks

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines