August 21, 2018, 12:08:02 am
Welcome, Guest. Please login or register.
Did you miss your activation email
News:

Arturia Forums



Author Topic: [Solved]Sequencer Issue  (Read 166 times)

croakascagbaron

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
[Solved]Sequencer Issue
« on: May 27, 2018, 07:14:25 am »
My sequencer seems to be acting strange and I'm wondering if I'm missing a parameter in the Midi Control Center or if maybe I somehow ended up with a prototype or defective unit. With the mode switch set to Seq and the number set to 1/up, I can hit record and enter a C major scale, then hit stop, then play and it will correctly play back my sequence. If I change the number dial to 2/down and do the exact same thing I get the 8 notes played forward and then backward, as if in Arp mode with the dial set to 3/Inc. Stranger still, when I try to record the same sequence to memory slot 3, I get the sequence played back with the seventh note flattened. Mem slots 4-7 all seem to be fine but 8 flattens the 3rd and the 7th note.

I re-read the sequencer sections of the manual and re-installed the latest firmware for the unit and the issue persists. Does anyone have any insight?



--EDIT--
Thanks to a user on reddit my problem has been solved. A hardware reset was required--hold the octave up and octave down buttons while powering the unit on.
« Last Edit: July 27, 2018, 02:00:09 pm by ben arturia »

 

Carbonate design by Bloc
SMF 2.0.13 | SMF © 2016, Simple Machines