March 29, 2024, 07:43:49 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: CV/Gate midi channel  (Read 2460 times)

behinger

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
CV/Gate midi channel
« on: March 15, 2018, 07:51:52 pm »
Would also be nice to be able to set a different CV/Gate midi channel independent of the global midi channel (like beatstep) - so that you could have an external or software sequencer send to the gate and CV outs, and have the USB midi, or DIN midi control a separate piece of hardware or software simultaneously. Like the beatstep. :)

masi

  • Full Member
  • ***
  • Posts: 112
  • Karma: 1
Re: CV/Gate midi channel
« Reply #1 on: March 25, 2020, 10:00:49 pm »
Ideally it shopuld be able to configurable which controls the CV/gate. The user, the sequence or the MIDI in.

Masi

MadGav

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: CV/Gate midi channel
« Reply #2 on: April 26, 2020, 04:34:23 pm »
The keys seem to always play the CV/gate regardless of the channel sent to MIDI out by the keyboard and the channel received from MIDI in by the CV/gate. This means you can’t use Keystep as a controller keyboard and MIDI/CV at the same time.

Two ways I think this could be resolved are:
1. A switch so that the keys only play the CV when the channels match (key channel is trivial to change shift+key)
2. A local off switch

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines