Not recognized as sound device

[bandrewsays]

Yesterday I went to record on my Mac and noticed that the audiofuse was not showing up in my audio preferences. I checked the USB connection, checked the power connection, and nothing was loose or unplugged. I checked on multiple computers with only the data USB plugged in, as well as both USB plugs connected and the Control Center still does not recognize the AudioFuse is connected. To determine if this was an issue with the cabling, I verified that the USB-Hub feature is still working on the audiofuse.

It's as though the audiofuse sound card disappeared or something. I'm not sure what would be causing this. Is this a known issue?

[Terrym]

Hi did you resolve this issue?  could try deleting the midi driver in audio midi set up then plug it back in again  or a hard reset by holding down the  main mono and cue wile powering up.

[Germain.arturia]

Hi bandrewsays, and welcome on this board.
Sorry you're encountering such issue.
When plugging the unit with USB Cable only, are you sure you plugged the thicker part of the double-usb cable?
Thicker part carries power + data, thinner part only carries extra power.
Please also note that the unit won't be recognized if you plug DC power + the thinner part of the usb cable only.

If you still have recognition issues, it can be good to perform a factory reset of your unit, as TerryM said ( Hi Terry! Thanks ! )
you have to hold Main Cue selector + Mono buttons while powering up the unit with Dc connection only ( the 2 first buttons under the big main output knob)

Hope this helps,
looking forward to read you,
best,

[tonysenghore]

I can't get the soundcard to be recognized by the arturia software at all on either PC or Mac. The hub shows up in device manager and system report but the software doesn't recognize the soundcard at all. I've been trying to make it work for 7 months, never got it to work.

Hi bandrewsays, and welcome on this board.
Sorry you're encountering such issue.
When plugging the unit with USB Cable only, are you sure you plugged the thicker part of the double-usb cable?
Thicker part carries power + data, thinner part only carries extra power.
Please also note that the unit won't be recognized if you plug DC power + the thinner part of the usb cable only.

If you still have recognition issues, it can be good to perform a factory reset of your unit, as TerryM said ( Hi Terry! Thanks ! )
you have to hold Main Cue selector + Mono buttons while powering up the unit with Dc connection only ( the 2 first buttons under the big main output knob)

Hope this helps,
looking forward to read you,
best,

[Amir Amor]

Hi Germain, Im having the same issue since upgrading to OSX Monterey - Audiofuse rev2 was working fine prior to the upgrade, now is not showing up in the sound devices on mac settings or by the audiofuse  control center?

Hi bandrewsays, and welcome on this board.
Sorry you're encountering such issue.
When plugging the unit with USB Cable only, are you sure you plugged the thicker part of the double-usb cable?
Thicker part carries power + data, thinner part only carries extra power.
Please also note that the unit won't be recognized if you plug DC power + the thinner part of the usb cable only.

If you still have recognition issues, it can be good to perform a factory reset of your unit, as TerryM said ( Hi Terry! Thanks ! )
you have to hold Main Cue selector + Mono buttons while powering up the unit with Dc connection only ( the 2 first buttons under the big main output knob)

Hope this helps,
looking forward to read you,
best,

[MajorFubar]

Hopefully you did a Time Machine backup before upgrading? In which case just roll back your OS.
Honestly Monterey has so many problems associated with interfacing correctly with external hardware from all mfrs, I'd have given it a hard pass had it not come on my Macs as standard.