March 29, 2024, 05:37:06 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: keylab 49 help with kong in reason 9.5 recording to midi  (Read 3144 times)

fblmusic

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
keylab 49 help with kong in reason 9.5 recording to midi
« on: November 20, 2017, 10:07:30 pm »
Just recently purchased Keylab 49 to replace my The Lab 49. Trying to figure out how to map the drum pads to work kong and record via midi.

did this and was able to hear the sounds but they won't record to the midi track. only when i play the keyboard does that happen. Am I missing something

Open your Reason Preferences and make sure KeyLab49 is set as the Master Keyboard
Then click on the Sync Tab - you'll see there are 4 Busses A-D
Set Bus A to - KeyLab 49 then close your Preference window
Switch to the Reason Rack and find the Hardware Interface - it's usually at the top of the rack. This is where you set your Audio I/O, switch to the Big Meter, or make Advanced MIDI settings. Which is exactly what we want to do.
Click on Advanced MIDI - in the fold down window, make sure Bus A is selected and displays KeyLab49
Click on MIDI Channel 10 and you'll see a menu of all the devices in your Rack - send MIDI Channel 10 to the "In" of the Kong Device you want to control with the Pads.
Bang your Pads - hear that?
You're done - now go make some music.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines