March 28, 2024, 07:41:47 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Drumbrute midi slave problem  (Read 2148 times)

STEVE2972

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 0
Drumbrute midi slave problem
« on: July 22, 2017, 03:16:55 pm »
When I set the DB  to Midi (slave) and controlled by my MC5000 as the master, it always misses the first step and as such is immediatly 1 step out of sync with everything else😩
What's the fix for this please?

Thanks in advance

I grec

  • Firmware Wizard
  • Administrator
  • Sr. Member
  • *****
  • Posts: 436
  • Karma: 24
Re: Drumbrute midi slave problem
« Reply #1 on: July 24, 2017, 10:08:31 am »
Hi STEVE2972,
Have you updated to the lastest firmware?

Best,
Y.

STEVE2972

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 0
Re: Drumbrute midi slave problem
« Reply #2 on: July 24, 2017, 03:01:08 pm »
Not yet no,I guess I will try this

STEVE2972

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 0
Re: Drumbrute midi slave problem
« Reply #3 on: July 24, 2017, 03:53:30 pm »
Ok,I`ve registered the Drumbrute but how do I download the latest firmware as it does not seem to exsist

Thanks for any help

STEVE2972

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 0
Re: Drumbrute midi slave problem
« Reply #4 on: July 24, 2017, 05:20:09 pm »
Ok I 'be managed to update to lastest firmware,but it still does it
Starts on 3 rd step when I press play on my Mc 5000.Strange thing I have also discovered is that if I press stop and play at the same time on the MC, it starts correctly on the 1st step!
It's not the MC5000 as everything else slaved to it work as it should

I grec

  • Firmware Wizard
  • Administrator
  • Sr. Member
  • *****
  • Posts: 436
  • Karma: 24
Re: Drumbrute midi slave problem
« Reply #5 on: July 25, 2017, 10:33:50 am »
There is no known synchronization issues in the latest DrumBrute firmware...
Is your MC5000 starting from position 0?
Quote
if I press stop and play at the same time on the MC, it starts correctly on the 1st step
Try pressing Stop before pressing Play -> how does it behave?
Your MC5000 may be sending a Song Position Pointer message if it is not at time 0, and the DrumBrute takes it into account.

Best,
Y.

STEVE2972

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 0
Re: Drumbrute midi slave problem
« Reply #6 on: July 26, 2017, 09:08:14 am »
Yes,starting from song position 0
It's hit and miss.Yes,sometimes if I return to song position O and press stop,then play it begins correctly.If I press stop and play at the same time it works ok
A little odd but it's not a big deal now I can make it work

Cheers



 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines