March 28, 2024, 07:15:33 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Im new to matrixbrute  (Read 1645 times)

Mick Rowe

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Im new to matrixbrute
« on: July 18, 2017, 01:09:18 pm »
Hi I just bought a matrix brute and can't seem to activate both the Seq and Arp buttons to enter the matrix arpeggiator . Only 1 button will activate . Do I have something switched on I shouldn't . Can't seem to find much mel pin manual

Matt Arturia

  • Administrator
  • Sr. Member
  • *****
  • Posts: 308
  • Karma: 43
Re: Im new to matrixbrute
« Reply #1 on: July 18, 2017, 01:30:10 pm »
Hi Mick,

To activate the Matrix Arpeggiator you have to press both Seq and Arp buttons at the same time.  If this is not working, are you sure that your unit is on the latest firmware available (1.1.0.73) ? You'll need the Midi Control Center to check the firmware revision of your unit.

Regards,

Matthieu

Mick Rowe

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: Im new to matrixbrute
« Reply #2 on: July 19, 2017, 04:52:28 am »
Hi Mathew
I'll check the firmware version . Appreciate your help. :)

Matt Arturia

  • Administrator
  • Sr. Member
  • *****
  • Posts: 308
  • Karma: 43
Re: Im new to matrixbrute
« Reply #3 on: July 19, 2017, 05:45:34 pm »
This feature was only implemented in the latest version of the MatrixBrute's firmware. If your unit is on a firmware < to 1.1.0.73 it's normal that you do not have access to the Matrix Arpggiator. Once you've update your unit, everything should be fine.

Mick Rowe

  • Apprentice
  • Apprentice
  • *
  • Posts: 4
  • Karma: 0
Re: Im new to matrixbrute
« Reply #4 on: July 22, 2017, 09:08:39 am »
All Fixed - Cheers Matt!!

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines