March 29, 2024, 12:32:05 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: How did i do this sequence?  (Read 2682 times)

VAU

  • Sr. Member
  • ****
  • Posts: 274
  • Karma: 0
How did i do this sequence?
« on: March 30, 2017, 04:21:43 pm »
i made a sequence (short forward backward, 8 steps)

if i transpoe it via keyboard, the first not always stays the same pitch /great effect!)

if i transpose it via pitchwheel, the sequence transposes incl first note.

but i don't remember how i did it. any idea?


SoundRider

  • Jr. Member
  • **
  • Posts: 79
  • Karma: 8
Re: How did i do this sequence?
« Reply #1 on: March 30, 2017, 05:06:58 pm »
Ahh ... so you have got the one with the magic key ... cool  8)

VAU

  • Sr. Member
  • ****
  • Posts: 274
  • Karma: 0
Re: How did i do this sequence?
« Reply #2 on: March 30, 2017, 05:43:01 pm »
yes but i'd fogotten that too.

seriously, i know it's embarassing, but it's a cool effect.


SoundRider

  • Jr. Member
  • **
  • Posts: 79
  • Karma: 8
Re: How did i do this sequence?
« Reply #3 on: March 30, 2017, 06:01:00 pm »
I will go now to the studio now and give it a try ... but I have uploaded the new FW 1.1 already ... will see :D

VAU

  • Sr. Member
  • ****
  • Posts: 274
  • Karma: 0
Re: How did i do this sequence?
« Reply #4 on: March 30, 2017, 06:38:48 pm »
same here. it works with 1.1

SoundRider

  • Jr. Member
  • **
  • Posts: 79
  • Karma: 8
Re: How did i do this sequence?
« Reply #5 on: March 30, 2017, 06:42:29 pm »
I have tried to reproduce it ... but maybe, I didn't understand correctly ... There is one "special feature" of the sequencer and maybe that could lead you back to where you have been.

If we step-sequence a pattern, let's say at pitch "G" lower then middle "C" - just to have an origin ... then later, if we play middle "C" again to start the sequence, the sequence plays starting with aforsaid "G". Maybe in combination with key-priortities you could go there again? I tried, but didn't succeed.

You are sure that you didn't have more modulation going on? Some keyboard-tracking off ... or the modulation track of the sequencer put to some odd function?

At least it was fun to try it ...  8)

SoundRider

  • Jr. Member
  • **
  • Posts: 79
  • Karma: 8
Re: How did i do this sequence?
« Reply #6 on: March 30, 2017, 06:44:08 pm »
same here. it works with 1.1

Can you give me a hint, what did you "modulate", or was it simply some notes and the forward/backward sequencer only?

SoundRider

  • Jr. Member
  • **
  • Posts: 79
  • Karma: 8
Re: How did i do this sequence?
« Reply #7 on: March 30, 2017, 07:02:04 pm »
I have played again ...

VCO 3 can be set not to track the keyboard directly ... but it's pitch can be modulated by one of the free mod-slots. Now we can modulate the keytracking of VCO 3 and this could at least mimik, what you have described, if the volume of VCO 3 is switched on and off in the mixer section too ...  ???

VAU

  • Sr. Member
  • ****
  • Posts: 274
  • Karma: 0
Re: How did i do this sequence?
« Reply #8 on: March 30, 2017, 07:05:16 pm »
@ reply #6:
i cannot give you a hint. it's not a test, i really would love to know how to do it.
there's nothing modulated in the seq mod track. 
i first thought it has to do with SYNC, as this sometimes has the same result (at least here)  as switching KEYB TRACKING off.
but i tried with sync off, same result.

of course most interesting would be, if one could also "freeze" other notes or even parameters..

@ reply #7
keyboard tracking vco 3 is on

SoundRider

  • Jr. Member
  • **
  • Posts: 79
  • Karma: 8
Re: How did i do this sequence?
« Reply #9 on: March 30, 2017, 07:49:58 pm »
You have made me curious and TBO I am interested to understand and/or replicate this too. Maybe I give it another try later. Have you saved this patch? Then you could analyse what is going on. Just check the settings/modulations one by one and if the effect dies ... you know the culprit?

VAU

  • Sr. Member
  • ****
  • Posts: 274
  • Karma: 0
Re: How did i do this sequence?
« Reply #10 on: March 30, 2017, 08:05:35 pm »
i'll do asap and let you know

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines