March 28, 2024, 06:21:48 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Spakle controller doesn't reflect the Spark 2 software correctly.  (Read 2174 times)

Nickzoll

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Hello,
I  have been using Sparkle for a month and had no issues till yesterday. So yesterday I noticed kind of weird behavior of the controller, for example when a pattern is playing some of the instrument pads are blinking according to the sequencer, but some are lit constantly. Or sequencer pads of the controller sometimes show steps that I don't hear and don't see in the software. Even more, I press record button, record starts but the button is not lit sometimes. Or both sequencer and pattern buttons are lit the same time. I have the same issues in standalone and vst mode, so think it doesn't depend on my daw. Suppose the Spark 2 software for some reason does not transmit signals to the controller correctly. Want to mention again that the glitches are not permanent, happen from time to time but pretty often.
Any ideas?
« Last Edit: February 02, 2017, 09:58:05 am by Nickzoll »

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #1 on: February 02, 2017, 04:02:04 pm »
Hi ,
check you're not getting midi loops in your set up .




Terrym
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

Nickzoll

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #2 on: February 02, 2017, 04:04:36 pm »
Thank you, I will, but I doubt this is the issue because have the same in standalone mode

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #3 on: February 02, 2017, 04:42:57 pm »
Have you installed all the latest firmware for sparkle and spark software.
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

Nickzoll

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #4 on: February 02, 2017, 04:46:01 pm »
Yep, I've bought it just one month ago, installed the latest firmware for sparkle and downloaded the latest version of spark2

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #5 on: February 02, 2017, 04:53:12 pm »
What system/setup are you using?
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

Nickzoll

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #6 on: February 02, 2017, 05:17:14 pm »
Windows 10 64, Live 9.5.

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #7 on: February 02, 2017, 05:40:33 pm »
Just checked on my mac and live and all is fine . so do you have the pads midi number the same as playback  . do you record patterns into live or just make them up in live.
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

Nickzoll

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #8 on: February 02, 2017, 05:50:46 pm »
I didn't change pad numbers, it should be standard. I do not record midi from spark2 into live, everything is triggered from spark2 internal sequencer. Again, I don't think the issue I'm facing has any connection to the DAW cause it is the same in standalone mode.

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #9 on: February 02, 2017, 05:55:32 pm »
the only thing i can say is try a different usb port maybe . if the pads are staying lit /or stuck it maybe a midi note off problem  so there could be an issue with your comp talking to the spark driver /hardware.
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

Nickzoll

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #10 on: February 02, 2017, 05:57:56 pm »
Thank you for your help, I was also thinking to try to reinstall driver. Changing of the usb port could also help, will try this tonight.

Nickzoll

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Re: Spakle controller doesn't reflect the Spark 2 software correctly.
« Reply #11 on: February 02, 2017, 09:59:38 pm »
Terry! Thank you so much for the idea. that was just a glitchy usb port! Issue resolved.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines