March 28, 2024, 10:30:31 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: [FR] add the clamp section to the 921  (Read 3577 times)

jmcecil

  • Full Member
  • ***
  • Posts: 128
  • Karma: 3
[FR] add the clamp section to the 921
« on: May 28, 2016, 03:46:47 pm »
It would be nice if the LFO had the additional clamp functions of the 921. 
cpu:i7 980x - RAM:12gb -  OS:Win8x64 - Interface:Lynx Aurora, Komplete Audio 6 -  MIDI:Midisport 4x4, Quadra Thru -
Host: Cubase 6.5/7 x64 | Reaper 4.5 x64 |Wavelab 8 x64 - Arturia Stuff: V Collection | Spark | Keylab 61

masi

  • Full Member
  • ***
  • Posts: 112
  • Karma: 1
Re: [FR] add the clamp section to the 921
« Reply #1 on: May 28, 2016, 06:26:30 pm »
You mean the "standalone" VCO 921 compared to the driver/OSC paring of a single 921a and three 921b?

Definitely a nice one to have (as it has been standard in the system 55).

Masi

jmcecil

  • Full Member
  • ***
  • Posts: 128
  • Karma: 3
Re: [FR] add the clamp section to the 921
« Reply #2 on: May 28, 2016, 06:57:06 pm »
Yes, an actual stand alone VCO 921.  I believe that the stand alone 921 is the LFO for those old MM configurations.  The Arturia version seems to have a stripped down stand alone 921 that they are calling an LFO.  I could be wrong, but I don't believe there was ever a Moog module like the LFO module on the Arturia MM.
« Last Edit: May 28, 2016, 07:04:17 pm by jmcecil »
cpu:i7 980x - RAM:12gb -  OS:Win8x64 - Interface:Lynx Aurora, Komplete Audio 6 -  MIDI:Midisport 4x4, Quadra Thru -
Host: Cubase 6.5/7 x64 | Reaper 4.5 x64 |Wavelab 8 x64 - Arturia Stuff: V Collection | Spark | Keylab 61

masi

  • Full Member
  • ***
  • Posts: 112
  • Karma: 1
Re: [FR] add the clamp section to the 921
« Reply #3 on: May 28, 2016, 11:18:47 pm »
IMHO the LFO module doesn't resemble a 921 at all. See https://www.soundonsound.com/sos/oct03/articles/moogretro.htm for images of both a 921 and a 921 a/b pair. The 921 has no LFO feature at all, but besides the clamp (what ist this BTW) it offers an aux output (same frequency) with a chosen waveform.

jmcecil

  • Full Member
  • ***
  • Posts: 128
  • Karma: 3
Re: [FR] add the clamp section to the 921
« Reply #4 on: May 28, 2016, 11:26:07 pm »
IMHO the LFO module doesn't resemble a 921 at all. See https://www.soundonsound.com/sos/oct03/articles/moogretro.htm for images of both a 921 and a 921 a/b pair. The 921 has no LFO feature at all, but besides the clamp (what ist this BTW) it offers an aux output (same frequency) with a chosen waveform.

The stand alone 921 has a LFO mode

As do the 901a/b and the 921a/b

The LFO in the Arturia modular is a non-existent module as far as I know. 

The big advantage to the stand alone 921 is variable waveshape soft sync.
cpu:i7 980x - RAM:12gb -  OS:Win8x64 - Interface:Lynx Aurora, Komplete Audio 6 -  MIDI:Midisport 4x4, Quadra Thru -
Host: Cubase 6.5/7 x64 | Reaper 4.5 x64 |Wavelab 8 x64 - Arturia Stuff: V Collection | Spark | Keylab 61

jmcecil

  • Full Member
  • ***
  • Posts: 128
  • Karma: 3
Re: [FR] add the clamp section to the 921
« Reply #5 on: May 28, 2016, 11:28:28 pm »

The Arturia one is basically just a subset of the capabilities as highlighted.
cpu:i7 980x - RAM:12gb -  OS:Win8x64 - Interface:Lynx Aurora, Komplete Audio 6 -  MIDI:Midisport 4x4, Quadra Thru -
Host: Cubase 6.5/7 x64 | Reaper 4.5 x64 |Wavelab 8 x64 - Arturia Stuff: V Collection | Spark | Keylab 61

jmcecil

  • Full Member
  • ***
  • Posts: 128
  • Karma: 3
Re: [FR] add the clamp section to the 921
« Reply #6 on: May 28, 2016, 11:35:31 pm »
Also, I have a pretty good grasp of the modular thing .. .I built a lot of these modules in my setup and have used a system 15 and 55 many, many times.


cpu:i7 980x - RAM:12gb -  OS:Win8x64 - Interface:Lynx Aurora, Komplete Audio 6 -  MIDI:Midisport 4x4, Quadra Thru -
Host: Cubase 6.5/7 x64 | Reaper 4.5 x64 |Wavelab 8 x64 - Arturia Stuff: V Collection | Spark | Keylab 61

masi

  • Full Member
  • ***
  • Posts: 112
  • Karma: 1
Re: [FR] add the clamp section to the 921
« Reply #7 on: May 30, 2016, 09:53:29 am »
The stand alone 921 has a LFO mode

Ah. I've seen only smaller images of the module. And I've never seen a real Modular :(

The big advantage to the stand alone 921 is variable waveshape soft sync.

The more it would be nice to have it in Arturia's implementation.

masi

  • Full Member
  • ***
  • Posts: 112
  • Karma: 1
Re: [FR] add the clamp section to the 921
« Reply #8 on: May 30, 2016, 09:54:08 am »

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines