April 26, 2024, 02:27:54 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: This is a wish for the next updated firmware : a button combination for PANIC  (Read 1516 times)

maddyman

  • Jr. Member
  • **
  • Posts: 65
  • Karma: 13
Just trying out the multiple settings with the BSP and sometimes it hangs. I can only save the project and have to turn the device off.

Would be nice to have a combination of buttons to get a "panic" command.

Zymos

  • Full Member
  • ***
  • Posts: 107
  • Karma: 12
It's already there (mentioned in the manual and everything)- hit the stop button 3x.

maddyman

  • Jr. Member
  • **
  • Posts: 65
  • Karma: 13
It is written there that the target device might be hanging and therefore a all notes off command often help.
But in my case(s) the BSP is totally hanging and your advice is for the birds.  :-\
Anyhow - thank you for the reply

DarkStar679

  • Apprentice
  • Apprentice
  • *
  • Posts: 17
  • Karma: 0
Had this yesterday. The BSP was frozen, almost all pads were light up and no reaction.
A power cut did help.

Valentin Arturia

  • Administrator
  • Full Member
  • *****
  • Posts: 149
  • Karma: 28
Pressing 3 times stop will send an All Notes Off message on every MidiChannels and therefore  that's not a solution if the BSP is hanging.
"A power cut did help" and that's the solution.
« Last Edit: July 27, 2015, 05:40:42 pm by ben arturia »

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines