March 29, 2024, 11:15:19 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Beatstep pro & Korg MS10  (Read 9184 times)

rezozvuk

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Beatstep pro & Korg MS10
« on: May 08, 2015, 04:48:42 am »
Hi.
I am wondering whether this device works correctly with the standard CV/GATE out using for Korg MS10,
if I am not mistaken it beatstep pro CV/GATE out = V/Oct
while the old Korg MS10 uses CV/GATE in = Hz/V
thank you!

dog01

  • Jr. Member
  • **
  • Posts: 62
  • Karma: 5
Re: Beatstep pro & Korg MS10
« Reply #1 on: May 08, 2015, 09:21:02 am »
it should work with the addition of the sq1 from korg which has both hz/v and V/oct. i am not sure if it act as a converter but is also has midi.
regards dog01

rezozvuk

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Beatstep pro & Korg MS10
« Reply #2 on: May 09, 2015, 06:02:12 am »
Unfortunately SQ10 no MIDI in. I want to manage my MS10 using BEATSTEP.
May have other options ih make friends?

Lofvberg

  • Apprentice
  • Apprentice
  • *
  • Posts: 16
  • Karma: 3
    • Swedish Hotsynth Quintet
Re: Beatstep pro & Korg MS10
« Reply #3 on: May 12, 2015, 03:58:14 pm »
You can use CV out from the Beatstep to the "VCO Freq" jack on the MS-10 and turn up the "Frequency Modulation  EG/EXT" knob to about 3/4. You need to figure out the exact amount needed for your synth. That knob is not very precise, but if you're lucky you can get it to track ok.

For the trig you need to reverse the gate signal from the Beatstep, because the older Korg uses S-trig. You can buy a converter cable or build it yourself (http://www.doepfer.de/faq/gen_faq.htm#S-Trig)

Good luck!
Kandidat Löfvberg
Member of Swedish Hotsynth Quintet
http://soundcloud.com/shotq

ben arturia

  • Administrator
  • Hero Member
  • *****
  • Posts: 822
  • Karma: 31
Re: Beatstep pro & Korg MS10
« Reply #4 on: May 13, 2015, 04:12:33 pm »
BeatStepPro will handle
- S-trigg and V-trigg
- Volts/octave and Htz/Volts

So no problems !
.......testing.......

rezozvuk

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 0
Re: Beatstep pro & Korg MS10
« Reply #5 on: May 20, 2015, 04:27:31 pm »
Thank you for your response
I want to clarify,
Beatstep  processes is whether it will be implemented in the future with?

ben arturia

  • Administrator
  • Hero Member
  • *****
  • Posts: 822
  • Karma: 31
Re: Beatstep pro & Korg MS10
« Reply #6 on: May 20, 2015, 04:42:44 pm »
Sorry but i don't understand your question ?
.......testing.......

charlycharlzz

  • Apprentice
  • Apprentice
  • *
  • Posts: 16
  • Karma: 3
Re: Beatstep pro & Korg MS10
« Reply #7 on: May 22, 2015, 10:13:05 pm »
I'm wondering the same but with the minibrute ?!?! what can beastep do to this vca input ?

DBM

  • Apprentice
  • Apprentice
  • *
  • Posts: 35
  • Karma: 1
Re: Beatstep pro & Korg MS10
« Reply #8 on: May 28, 2015, 07:35:14 pm »
BeatStepPro will handle
- S-trigg and V-trigg
- Volts/octave and Htz/Volts

So no problems !

Is that either or or can each track / part be either ?

Terrym

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.542
  • Karma: 40
    • soundcloud.com/logicaldream
Re: Beatstep pro & Korg MS10
« Reply #9 on: May 28, 2015, 09:35:54 pm »
you can set each sequence to either volts or htz on the mcc and save it to the BSP

see screenshot


Terrym
TerryM
ARTURIA Tester for Minifreak,All software Polybrute,Keystep pro,Audiofuse range, Microfreak,Kl49mkII,DrumBrute,Spark,Analog lab3,KLE,kl88,matrix12,Semv,Beatstep,Minibrute 2,Pigments
ASC,Vcol6, Beatstep pro, VCOL8, Synclavier v.Minibrute2s

DBM

  • Apprentice
  • Apprentice
  • *
  • Posts: 35
  • Karma: 1
Re: Beatstep pro & Korg MS10
« Reply #10 on: June 02, 2015, 02:44:19 pm »
Nice .
I'll go ahead and request all these settings to be either hardware controllable or midi cc controllable or both ;)

Lu77

  • Jr. Member
  • **
  • Posts: 50
  • Karma: 2
Re: Beatstep pro & Korg MS10
« Reply #11 on: June 05, 2015, 04:53:46 pm »
Wow! Nice feature! Dream feature even!

paulskiogorki

  • Apprentice
  • Apprentice
  • *
  • Posts: 10
  • Karma: 0
Re: Beatstep pro & Korg MS10
« Reply #12 on: July 09, 2015, 07:15:40 pm »
Here's a tutorial from Arturia relating to the MS20. Might help.
http://forum.arturia.com/index.php?topic=84889.0

Steinberger

  • Jr. Member
  • **
  • Posts: 61
  • Karma: 2
Re: Beatstep pro & Korg MS10
« Reply #13 on: July 20, 2015, 01:40:19 am »
Let me add this little tidbit on the SQ-1 just in case you're considering dropping it from consideration. No hardware MIDI Din In on the SQ-1 but you DO have full MIDI I/O over USB. By default CV/Gate-A is on MIDI ch 1 and B is on ch 2. So the SQ-1 does act as a MIDI to CV converter when stopped. I use it this way all the time with keyboard controllers as well as Electribes. Getting USB MIDI into the SQ-1 is as easy as connecting it to a thru box that supports USB clients or hosting it on a powered USB hub on an iConnectMIDI4+ or Audio4+.

Example: If you slave its clock to a BeatStep Pro you now have two more pair of CV/Gate outs and can modulate yourself into a coma state :)

Or just use the sync I/O and go au natural.
« Last Edit: July 20, 2015, 01:42:38 am by Steinberger »

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines