March 29, 2024, 08:46:15 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Beatstep & Korg DW-6000, DW-6000 not responding to encoders  (Read 2893 times)

shiba eno

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Beatstep & Korg DW-6000, DW-6000 not responding to encoders
« on: April 21, 2015, 01:15:40 am »
Hey.
Anyone know why my DW-6000 would be responding to all note values but not to cc from the encoders? My DW is set to take ALL info, not just Note (paramater 82 I think). Same midi channel. WHAT'S THE DEAL. Help.

dog01

  • Jr. Member
  • **
  • Posts: 62
  • Karma: 5
Re: Beatstep & Korg DW-6000, DW-6000 not responding to encoders
« Reply #1 on: April 21, 2015, 07:40:52 am »
hi shiba eno i thought the dw 6000 only responded to midi SysEx messages which as far as i know the beatstep can not send have you been able to control the dw 6000 with other midi hardware using ccs
 

dog01

  • Jr. Member
  • **
  • Posts: 62
  • Karma: 5
Re: Beatstep & Korg DW-6000, DW-6000 not responding to encoders
« Reply #2 on: April 21, 2015, 09:50:31 am »
hi while searching i also found this list of cc for the dw6000

so perhaps i was wrong . also let me know how you go as i have dw6000 and was thinking about getting a beatstep or beatstep pro to control it.

——————————–
3   VCF EG Int
9   Resonance
12   Chorus
14   OSC1 Wave
15   OSC2 Wave
74   Cutoff
75   OSC1 Lvl
76   OSC2 Lvl
77   Noise Lvl
78   OSC1 Octave
79   OSC2 Octave
80   OSC2 Detune
81   OSC2 Interval
82   Bend2OSC
84   Portamento
85   VCF EG A
86   VCF EG D
87   VCF EG BP
88   VCF EG SL
89   VCF EG S
90   VCF EG R
91   VCF EG Polarity
92   Bend2VCF
93   VCF Kbd Track
102   VCA EG A
103   VCA EG D
104   VCA EG BP
105   VCA EG SL
106   VCA EG S
107   VCA EG R
108   MG Frequ
109   MG Delay
110   MG OSC
111   MG VCF
35   Assign

nope the midi cc are just for a  crlt panel thingy which converts them to midi sysex  the dw6000 only responds to the following cc according to the manual
1 cc  pitch mod
2cc  vcf mod
7 cc volume
64cc  damper pedal
65cc  portamento switch

i have read up on dw6000 and it has problems with midi if you are not on channel one also i tested controlling dw 600 with my experiences the lab keyboard  and it work fine with cc7 so i would start there with the beatstep mapping an encoder to 7cc 0-127 channel one let me know how you go and sorry for my bad spelling and grammar  regards dog01


« Last Edit: April 22, 2015, 05:13:17 am by dog01 »

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines