March 19, 2024, 11:55:18 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Knob encoder acceleration setting  (Read 48067 times)

phimeis

  • Newbie
  • *
  • Posts: 2
  • Karma: 1
Knob encoder acceleration setting
« on: April 14, 2014, 09:08:02 am »
Please teach about Knob encoder acceleration setting.

I can not setting knob encoder acceleration(Slow, Medium, Fast) by Midi control center.
It is not reflected on DAW even if it sets by Midi control center.

My DAW environment is below.
Live9, Windows 7

This problem looks like the following video.
http://www.youtube.com/embed/_N7NyknCEpM

In other midi controller(Korg nanopad, etc), does not have this problem.

Drakhe

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: Knob encoder acceleration setting
« Reply #1 on: April 14, 2014, 10:12:54 pm »
Same issue here, I can set the acceleration in Midi Control Center, changing preset shows the value of the global setting changing, but the knobs still respond as in slow mode. I have latest version of the software and firmware! Behaviour is consistent whatever hardware I use (wether PC or iPad)

devilwidget

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 3
Re: Knob encoder acceleration setting
« Reply #2 on: April 16, 2014, 12:10:54 pm »
Same here!

Mallard

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Knob encoder acceleration setting
« Reply #3 on: April 17, 2014, 01:22:32 pm »
Same problem here :(

Dav1d

  • Hero Member
  • Hero Member
  • *****
  • Posts: 624
  • Karma: 48
Re: Knob encoder acceleration setting
« Reply #4 on: April 17, 2014, 02:09:56 pm »
We are aware of this issue and are working on a solution right now.
Next version is comming soon
 :)

devilwidget

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 3
Re: Knob encoder acceleration setting
« Reply #5 on: April 29, 2014, 03:02:12 pm »
Is that "mini brute firmware update" soon, or actual soon?

Goon

  • Jr. Member
  • **
  • Posts: 60
  • Karma: 8
Re: Knob encoder acceleration setting
« Reply #6 on: May 03, 2014, 08:14:01 pm »
The same 'soon' as the fix for same knob problem with the Minilab, soon over a year ago.......

kickwizard

  • Full Member
  • ***
  • Posts: 227
  • Karma: 15
    • My soundcloud
Re: Knob encoder acceleration setting
« Reply #7 on: May 04, 2014, 08:08:01 pm »
The same 'soon' as the fix for same knob problem with the Minilab, soon over a year ago.......

To be fair they revised the Minilab board and updated analog lab and analog lab works well for me

My minilab has a hardware issue I couldn't be bothered to send it back so I kept it used it still but retired it down to buying a mininova and no longer have desk space

AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

DAMM YOU TO DAMMNATION AUDIO COMPANYS WITH YOUR DESKTOPS WHERE CAN I PUT IT ALL ?

I was offered to return it and have it replaced promptly by the support team

The software is the most interesting part and for the price its unbeatable and im sure there still updating and will be another release soon

Enough derailing this Beatstep thread

Maybe goon you should have returned it or forget about it and spent your time making music as this seems futile no one understands the problem
« Last Edit: May 04, 2014, 08:22:10 pm by kickwizard »

Goon

  • Jr. Member
  • **
  • Posts: 60
  • Karma: 8
Re: Knob encoder acceleration setting
« Reply #8 on: May 05, 2014, 12:42:02 am »
I have replaced it already with a Korg Taktile which will be here this very week. The idea behind these products is good, but the implementaion and support is truly awful..

devilwidget

  • Apprentice
  • Apprentice
  • *
  • Posts: 5
  • Karma: 3
Re: Knob encoder acceleration setting
« Reply #9 on: May 05, 2014, 09:24:48 pm »
Given there have been some problems with quite slow updates in the past, can someone from Arturia be a bit more specific about when this will be fixed? It would be really helpful. thanks.

an3

  • Apprentice
  • Apprentice
  • *
  • Posts: 36
  • Karma: 2
Re: Knob encoder acceleration setting
« Reply #10 on: May 05, 2014, 11:29:50 pm »
me too. unclear if how when they will udpate bugs or add new features. sending it back tmrrw
:(

reflexibel

  • Apprentice
  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
Re: Knob encoder acceleration setting
« Reply #11 on: May 06, 2014, 03:35:41 pm »
I have also Problems using the Knobs for making Music
I can not use it in Bitwig Ableton Traktor for Live Edits  ???
 ::)

nfdoctor

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
  • Hello
Re: Knob encoder acceleration setting
« Reply #12 on: May 12, 2014, 08:10:39 am »
Why did Arturia release Beatstep despite of its problem ?
The control center 'obviously' has the function which changes knob encoder acceleration,
so they should check if it worked correctly before factory shipments.
I think we're allowed to return this product for a full refund
because this is the fatal defect in the quality control.
Arturia & Dav1d ,
you have to clarify when you will fix this bug here as soon as posible.
« Last Edit: May 31, 2014, 06:58:29 pm by nfdoctor »

dryp

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: Knob encoder acceleration setting
« Reply #13 on: May 15, 2014, 01:16:06 pm »
Dear Arturia Staff!

I have the same issue with the knob acceleration on my beatstep.  I ve just read the arturia beatstep manual (section 5.3.3).
Your manual confirms  that the control knob acceleration on the arturia beatstep (which i purchased) is fully working:

"With this parameter you are able to try three different response curves for the encoders  and see which one works best for you".

Since i payed for the product ,(at least) i would like to know exactly when the update will come to fix this problem.

Thanks dr.yp

DGT

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 2
Re: Knob encoder acceleration setting
« Reply #14 on: May 20, 2014, 06:55:35 am »
I just wanted to echo these comments. Arturia/Dav1d, can you please comment on when this will be fixed? Also, will "Fast" mean 1 full turn of the knob = 0-127, or will it take more turns? Will we have any option to customize this? Half the reason I purchased the Beatstep was for the knobs. If everything functioned properly then the Beatstep with its pads and knobs is amazing, but if the knobs can't be used for any usable live control or for usable automation writing (other than usable but super slow control with little hitches when you have to flip your hand around to keep turning the knob) then I have to return the product.

Dav1d, can you let us know? I'll gladly keep the Beatstep if it functions as intended. But if there is no answer on this soon then I'll have to return it. I was so enamored with it until I assigned the knobs to a filter cutoff...

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines