March 28, 2024, 03:53:44 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: first day & MaxForLive-patch to speed up the encoders  (Read 4168 times)

pyrolator

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 1
first day & MaxForLive-patch to speed up the encoders
« on: April 03, 2014, 05:10:47 pm »
Its my first day with the Beatstep and I would like to share some impressions:

The "feel" of the controller is very good and the pads have the right velocity for my fingers.
The sequencer runs tight - in my setup with Ableton Live I am using a Midi-Pre-Delay of -42ms.

I would suggest a few updates for future-firmware-updates:
1. In Sequenzer-Mode: Turn the Encoders with "Shift"= Velocity
2. In Sequenzer-Mode: Turn the Encoders with "Chan" = Gate-Length
3. In Sequenzer-Mode: Turn the Level/Rate with "Shift" = Swing

Also: Even in Acceleration-Mode the Encoders are MUCH too slow for fast movements. It tales about 5 turn to get the full 0-127 scale. Please update!

Thanks a lot, great controller!
« Last Edit: April 05, 2014, 04:20:23 pm by pyrolator »

niksliwerski

  • Apprentice
  • Apprentice
  • *
  • Posts: 8
  • Karma: 0
Re: first day
« Reply #1 on: April 05, 2014, 10:05:01 am »
Yes, after only a day I can def. feel those would be great implementations to make the sequencer waaay more useful.

FIngers crossed Arturia!

pyrolator

  • Apprentice
  • Apprentice
  • *
  • Posts: 3
  • Karma: 1
Re: first day
« Reply #2 on: April 05, 2014, 04:19:40 pm »
I wrote this MaxForLive-patch to speed up the encoders. Speedfactor 5 would be one turn for the whole 128 values. The ramp is interpolated so you dont hear any glitches.

http://www.maxforlive.com/library/device/2243/beatstep-speeddialer



« Last Edit: April 05, 2014, 04:21:43 pm by pyrolator »

ganglio

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: first day & MaxForLive-patch to speed up the encoders
« Reply #3 on: April 09, 2014, 10:25:31 pm »
+1 for the encoder issue in Live, and thanks pyrolator for the max patch.

djmental

  • Apprentice
  • Apprentice
  • *
  • Posts: 23
  • Karma: 1
Re: first day
« Reply #4 on: May 24, 2015, 06:49:04 am »
I wrote this MaxForLive-patch to speed up the encoders. Speedfactor 5 would be one turn for the whole 128 values. The ramp is interpolated so you dont hear any glitches.

http://www.maxforlive.com/library/device/2243/beatstep-speeddialer



Will this let me change to any of the 16 presets for changing knobs function ?

I don't want to control just 16 parameters.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines