February 20, 2019, 02:32:02 am
Welcome, Guest. Please login or register.
Did you miss your activation email

Arturia Forums

Author Topic: Connecting all the arturia gear  (Read 4246 times)


  • Jr. Member
  • **
  • Posts: 54
  • Karma: 3
Connecting all the arturia gear
« on: November 13, 2013, 12:38:57 pm »
im proud owner of a Minibrute, Microbrute and Spark VDM. but im getting in trouble to sync everything together.
i managed to sync everything, when running spark as standalone and master, but i dont get it sync in my DAW (FL-Studio 11)
my setup is like this:

Masterkeyboard which should control my Critter&Guitari Pocket Piano (MIDI) and my DAW.
my DAW should be the master clock syncing the other gear (Minibrute, Microbrute, Spark VDM)
Minibrute and Spark are synced, but i didnt get the Micro synced. it works via gate in from the Mini, but i want it to be controlled by midi, not just the gate.

since im a total midi noob, it would be so nice if someone could tell me how to setup this in my daw.

my Interface is a Focusrite saffire 6

Arturia Gear: Spark CDM, Minibrute, Microbrute
win7 x64 : intel i7@2ghz : 8gb : nvidea gt555m : focusrite saffire 6


  • Global Moderator
  • Hero Member
  • *****
  • Posts: 503
  • Karma: 34
Re: Connecting all the arturia gear
« Reply #1 on: November 15, 2013, 10:00:04 am »
I don't know how to set it in FL studio, but you have to make sure the midi clock is sent to microbrute.
And that "Sync" parameter is set to "Auto" or "ext" in Microbrute Connection Software. If you set it to ext, be aware that the sequencer with not run until is gets a midi clock.

Arturia Hardware


Carbonate design by Bloc
SMF 2.0.13 | SMF © 2016, Simple Machines