April 23, 2024, 09:16:29 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Prophet V filter attack randomly not working  (Read 748 times)

Syd0w

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Prophet V filter attack randomly not working
« on: August 25, 2022, 11:50:41 am »
Hi there,

I set the attack of the prophet V to have a nice sweep and half of the time when I press a key, there will be no attack time, the filter is immediately open.

Even if I press a single key several times, it will sometimes slowly open the filter, sometimes be directly fully open.

Any suggestions ?
Thanks


LBH

  • Hero Member
  • *****
  • Posts: 4.920
  • Karma: 261
Re: Prophet V filter attack randomly not working
« Reply #1 on: August 25, 2022, 03:50:19 pm »
Hi,

It's allways good if you name a factory preset or post a preset to be explored.

It sound like you use long Filter Envelope Release times to what i suppose is a slow Attack time.
You allways start at current envelope level, when you hit a key, so it can build up so you at a point start at max level. That's quite normal behavior in at least vintage analog synth.

A Prophet 5 use reassign playmode, so when you repeat the same note, then the same voice is assigned.

Can this be what you exsperience?

Syd0w

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Prophet V filter attack randomly not working
« Reply #2 on: August 26, 2022, 02:31:12 pm »
Hello,

Indeed I had not payed attention to the release time of the filter envelope which was had a very slow setting. Hence the perceived "randomness" which actually wasn't !

Thank you very much for the very clear explanation.

Cheers

LBH

  • Hero Member
  • *****
  • Posts: 4.920
  • Karma: 261
Re: Prophet V filter attack randomly not working
« Reply #3 on: August 27, 2022, 12:26:32 am »
Your welcome.

Cheers

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines