March 29, 2024, 12:49:15 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: PolyBrute sequencer/arp is overridden by cc64  (Read 1195 times)

zootermac

  • Apprentice
  • *
  • Posts: 15
  • Karma: 1
PolyBrute sequencer/arp is overridden by cc64
« on: July 17, 2021, 04:56:26 am »
PolyBrute sequencer/arp out to other midi gear and soft synths works great.

However, there is one caveat I am finding.

It does not like cc64 (the cc# associated with sustain pedal / Hold button on the PolyBrute).

When using a sustain pedal or pressing Hold on PolyBrute this sends a cc64 out. Unfortunately this overrides the arp/sequencer pattern and so the result is only the sustained notes played and held together (i.e. no pattern).

Is this an oversight in the PolyBrute seq/arp system? Can it be fixed or highlighted as something that needs fixing?

I would expect Hold/sustain to continuously send out the arp/sequencer pattern when arp/seq is ON.


Moho

  • Apprentice
  • Jr. Member
  • *
  • Posts: 60
  • Karma: 0
Re: PolyBrute sequencer/arp is overridden by cc64
« Reply #1 on: July 17, 2021, 07:59:09 pm »
The hold button transmits whatever the settings resulting in a midi loop

The only solution I could find was to use an external filter to remove it making it useless, but at least it stopped me from selecting a preset that had the hold button on and locking the polybrute up with a midi loop.

Reported months ago and was told they were working on a fix. 
« Last Edit: July 19, 2021, 09:41:17 am by Moho »

zootermac

  • Apprentice
  • *
  • Posts: 15
  • Karma: 1
Re: PolyBrute sequencer/arp is overridden by cc64
« Reply #2 on: July 19, 2021, 04:49:28 am »
When arp/seq is ON, the Hold button does not transmit the arp/seq pattern.

Instead it just transmits the sustained note or chords as if no arp/seq were active.

Moho

  • Apprentice
  • Jr. Member
  • *
  • Posts: 60
  • Karma: 0
Re: PolyBrute sequencer/arp is overridden by cc64
« Reply #3 on: July 19, 2021, 09:59:30 am »
Even with control change set to off so none of the knobs and switches send midi CC the hold button still transmits creating a loop.
Didn't realise the hold pedal did the same  :(

Hopefully a fix will come soon.

zootermac

  • Apprentice
  • *
  • Posts: 15
  • Karma: 1
Re: PolyBrute sequencer/arp is overridden by cc64
« Reply #4 on: July 19, 2021, 01:20:18 pm »
Indeed, hopefully!

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines