September 17, 2021, 03:08:18 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News:

Arturia Forums



Author Topic: MB Sequencer and Arp to Modular  (Read 981 times)

Melita

  • Apprentice
  • *
  • Posts: 7
  • Karma: 0
MB Sequencer and Arp to Modular
« on: April 22, 2021, 01:37:13 am »
I have a presale question about this:
The Sequencer and/or Arpeggiator on the MB, if used with Modular or any other external Synths
with CV I/O, are they rendered useless? What i mean, on the Elektron AK you have 4 Tracks for
its own sounds and then a CV Track for external Synths, how is this handled on the MB?
If i create a Sequence controlling an external Synth with it, how can i then use the Internal
Sound Engine with the same Sequencer and Arp? Or there is actually 2 Tracks in it 1 for external
and 1 for internal as on the Elektron AK? Hope you understand my question.

Thanks.

WolfEsch

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: MB Sequencer and Arp to Modular
« Reply #1 on: April 22, 2021, 05:03:42 pm »
You can connetc MB with your Elektron. Either Elektron as master or Vice versa. If you want to use MatrixBrute just as additional Voice then connect gate out from your Elektron to MB Gate-In and the tracking from Elektron to MB VCO1 Pitch in.
You also can run both sequencer in parallel if you use the sync input and output. Hope this helps.

Lunatic Sound

  • Full Member
  • ***
  • Posts: 141
  • Karma: 2
Re: MB Sequencer and Arp to Modular
« Reply #2 on: April 22, 2021, 10:12:48 pm »
Or to answer it simply, there is only one.

Haylee

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
Re: MB Sequencer and Arp to Modular
« Reply #3 on: July 24, 2021, 08:37:22 am »
I apologize in advance if this has been asked & answered, I searched and gave up.Also the manual wasn't clear.

Does the microbrute sequencer output to the CV pitch and gate outputs?

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines