March 28, 2024, 08:54:03 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Firmware 3 bug with cycling envelope time  (Read 898 times)

qbassa

  • Apprentice
  • *
  • Posts: 27
  • Karma: 0
Firmware 3 bug with cycling envelope time
« on: January 14, 2021, 11:31:10 pm »
When I am adjusting cycling envelope Rise/Fall shape (with shift) and release the shift and start adjusting Rise/Fall time the time value jumps to longer value of few seconds. I often use very short times in looping mode (lets say 10ms). Shape adjustment shouldn't affect Rise/Fall time that was set before adjusting shape.
I also would appreciate finer time settings in the shortest range and more precise step of 0.1ms between 0 and 10ms (it could be special mode for short cycling envelope times where whole range is 0 to 100ms for example or the maximum time is configurable - this would give amazing additional FM like modulation possibilities).

Best!
Jakub Kostynowicz 

Germain.arturia

  • Administrator
  • Sr. Member
  • *****
  • Posts: 373
  • Karma: 23
  • arturia test team
Re: Firmware 3 bug with cycling envelope time
« Reply #1 on: January 15, 2021, 01:02:44 pm »
HI Qbassa,
yes i can reproduce it. can't tell if this appeared with this new 3.0.6 version.
logged this into our bugtracker.
Regarding your feature request, i'll discuss it with devs.
thanks,

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines