January 21, 2021, 10:23:35 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News:

Arturia Forums



Author Topic: Audiofuse Studio - 48v phantom power noise  (Read 104 times)

wstratton

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Audiofuse Studio - 48v phantom power noise
« on: January 11, 2021, 06:14:51 pm »
Hey all, I just bought an Audiofuse Studio to replace an Apollo Twin, and I'm impressed with it, except for one big problem--activating phantom power on any of the four preamps causes a lot of static noise when microphones are connected. When only a cable is connected, there is significantly more noise, but the noise with the microphones connected is significant enough to make the recorded signal unusable. I've A/Bed with other preamps and I've tried other power sources, and I've tried disconnecting the device from the computer--same result in all cases. Before I send this back to the retailer, any ideas?

wstratton

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Audiofuse Studio - 48v phantom power noise
« Reply #1 on: January 13, 2021, 09:11:26 pm »
Never mind, this may be an issue with humidity or faulty microphone capacitors that has nothing to do with the AudioFuse. I'll report back if further testing reveals otherwise!

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines