March 28, 2024, 04:10:06 pm
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: Square Attack patch + phantom modulation oscillator frequency  (Read 4195 times)

PacificState

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
I feel a bit stupid posting this, but I've just started using the Easel and am having a problem:

If I load the Square Attack patch and change the gate settings so I can only hear the modulation oscillator, it's pretty clear that its frequency is being modulated by a sine wave; however, this continues after pulling *all* the patch cords and turning all the sliders down, which should leave it at a constant frequency. I can't figure out where this modulation is coming from - what am I missing?

LBH

  • Hero Member
  • *****
  • Posts: 4.920
  • Karma: 261
Re: Square Attack patch + phantom modulation oscillator frequency
« Reply #1 on: March 15, 2020, 05:26:34 pm »
Hi and welcome to Arturia forums.

You are welcome to ask.

My guess is, you are talking about the 5 modulations that's set in the LEFT HAND section in the extended view.  (Click the button with two arrows in the top right of the applications to get into extended views of Arturias applications.)
« Last Edit: March 15, 2020, 05:29:09 pm by LBH »

PacificState

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
Re: Square Attack patch + phantom modulation oscillator frequency
« Reply #2 on: March 15, 2020, 08:41:48 pm »
I'm a doofus - that's it, thanks!

LBH

  • Hero Member
  • *****
  • Posts: 4.920
  • Karma: 261
Re: Square Attack patch + phantom modulation oscillator frequency
« Reply #3 on: March 16, 2020, 12:20:04 am »
Your welcome.

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines