Arturia Forums
Software Instruments => Matrix 12 V2 => Matrix 12 V2 - Technical Issues => Topic started by: Despondo on September 12, 2019, 06:12:37 pm
-
Does anyone else have the free library set called 'Iconic Vibrations'? If so, can you verify the following issue?
I wrote a song using a patch for the Matrix-12 V2 plugin called 'Black Air' that was included in the free 'Iconic Vibrations' library. It plays fine in an older version of the plugin (Version 2.2.0.1183), but produces a feedback loop in the latest version of the plugin (version 2.4.1.2810).
I submitted this to support, but wanted to see if others are having the same issue with this patch.
WARNING!!! IT WILL PRODUCE A DAMAGING FEEDBACK LOOP, SO HAVE YOURSELF READY TO TERMINATE THE PLUGIN, OR TURN DOWN YOUR VOLUME!!!!!
-
It's the DELAY that self oscillate because of the settings for FEEDBACK and/ or the DAMPING.
I think perhaps something has changed, so this happens with lower FEEDBACK and higher DAMPING settings for the DELAY as it have done before. Perhaps there is a reason for this, but i don't know.
If you in the preset you mention lower the DELAYs highest set FEEDBACK setting or the DAMPING setting or both, then the continous self oscillation can be tamed.
-
I see. I will give this a try tonight. Thanks.
-
Same thing here.
When the delay feedback is set too high it generates a self oscillating feedback.
-
Self-oscillation is'nt in it self an issue, if it work correct.
But if there was'nt any self-oscillation before, then one can wonder, why it has changed. It can just as well be an improovement overall, but perhaps not for some presets.