Arturia Forums
Hardware Instruments => MicroFreak => MicroFreak - Technical Issues => Topic started by: fede bts on May 17, 2019, 12:58:25 pm
-
I am having problems with my microfreak, and I fear my unit could be faulty. Yesterday, playing with my Digitakt I noticed some problems with the jack-midi converters (they were alternatively working, not working, sending spurious messages). I then tried to replace them with the beatstep pro cables, and - to my surprise - they were working correctly. I tried different configurations, and I came up with this scheme:
Microfreak cables:
1)
digitakt midi out > microfreak midi in: OK
microfreak midi out > digitakt midi in: Not working
2)
digitakt midi out> microfreak midi in: OK
microfreak midi out > digitakt midi in: Not working
Beatstep pro cables:
1)
digitakt midi out> microfreak midi in: OK
microfreak midi out > digitakt midi in: OK
2)
digitakt midi out> microfreak midi in: OK
microfreak midi out > digitakt midi in: OK
I tried to power the Microfreak both with the included PSU and with a USB powerbank. I tried the Microfreak cables with beatstep pro and it seemed to work just fine. I tried with and without a Kenton Kodi thru.
I then noticed another strange behavior. When powering Microfreak off, I can hear a loud static noise: https://youtu.be/ASlhuit8iek Please note I have tried with several cables and instruments and the Microfreak appears to be the only one producing this outcome.
-
Hello, i have the same "power-off issue"!
I also tried several types of cables to connect the MF to my USB interface,
but always the same loud static noise...
I never had this problem with other machines.
Is my unit faulty?!
Greets
-
Hello.
MIDI adapters: Please contact us through this page: www.arturia.com/support/askforhelp/issues (http://www.arturia.com/support/askforhelp/issues)
We will send replacement ones !
Don't forget to provide us with your full name, shipping address and phone number ;)
Edouard
-
Hello.
MIDI adapters: Please contact us through this page: www.arturia.com/support/askforhelp/issues (http://www.arturia.com/support/askforhelp/issues)
We will send replacement ones !
Don't forget to provide us with your full name, shipping address and phone number ;)
Edouard
The problem is probably due to a midi out damaged port. Is has been sent to the Italian official repairer :'(