Arturia Forums

Software Instruments => Analog Lab 4 => Analog Lab 4 - Technical issues => Topic started by: looneytunes on May 14, 2019, 11:05:47 pm

Title: Analog Lab 'forgets' Prophet V sustain value after switching instruments
Post by: looneytunes on May 14, 2019, 11:05:47 pm
Enclosed are a patch for Prophet V ([P5] Lonely Man on the Corner), and SEM V ([SEM] LD).   

1.) Make both available in their respective instruments, and see that they are available in Analog Lab 4.
2.) Select the [P5] patch.  Set the Sustain  parameter to 'Legacy' (such that CC64 will sustain that patch), and re-save that patch.
3.) Switch to a patch in a different instrument (i.e. select the [SEM] patch)
4.) Switch back to the [P5] patch.   Look at the 'sustain' value.   For me, this is always reset back to 'Normal', and it forgets that it has been saved as 'Legacy')

Thanks,
Kevin L

Title: Re: Analog Lab 'forgets' Prophet V sustain value after switching instruments
Post by: LBH on May 24, 2019, 10:17:48 pm
It look like Prophet does'nt save the sustain pedal setting in the lower toolbar.
Title: Re: Analog Lab 'forgets' Prophet V sustain value after switching instruments
Post by: looneytunes on June 02, 2019, 01:40:05 am
It would really be good if someone from Arturia could:

1.) Verify/acknowledge the problem
2.) Post a bug number and be accountable for a problem

This forum doesn't seem to be of much use for reporting bugs.  :'(

Kevin L
Title: Re: Analog Lab 'forgets' Prophet V sustain value after switching instruments
Post by: LBH on June 02, 2019, 01:49:51 am
You can allways contact Arturia support through your Arturia account, if you wish. This is mainly a user forum. You shall not exspect Arturia to answer here, even if they may follow the forum, and even if they may see you post, and even if they may fix a certain bug. It could many times be god to get a response, but as said - , you can't exspect it. Sometimes Arturia do answer in the forums.