Arturia Forums

Hardware Instruments => MicroBrute => MicroBrute Technical Questions - FAQ => Topic started by: momodig on April 02, 2019, 12:50:22 am

Title: My MicroBrute and Beatstep Pro
Post by: momodig on April 02, 2019, 12:50:22 am
I posted in the BSP thread, but was suggested to come over here for some ideas.  I'll start at the beginning.  But I think I narrowed it down to microbrute... my BSP is sending gate out volts, but the microbrutes gate in isn't accepting them it seems?  I'm thinking the issue at it's core is the gate in on my microbrute... suggestions great appreciated.

I've connect my BSP the following way and according to this video.

Here's my issue... everything works as it should using MIDI, but I'd like to get it to work like the guy in the video.

 have gate out from bsp to micro.

I have velocity from bsp to filter on micro.

I have pitch from bsp to pitch on micro

I'm set up on seq 1...

I press the pad buttons on bsp nothing happens, but if I play a note on the micro, hold that note, then press the pads on the bsp I get fading sounds... how do I press the pads on the bsp to play, without touching the keys on the micro...