Arturia Forums
DRUMS => Spark => Spark Technical Issues => Topic started by: production51 on January 25, 2019, 01:44:10 pm
-
My SPARK CDM hardware is not powering up via USB anymore and fails to be recognized by SPARK software (V2.4.0) and Mac OS 10.13.3
I have tried to reinstall the firmware via the MIDI Control Centre but the hardware fails to be recognized...I have checked the USB connection via the OS 'system report' and it is not listed in the 'USB Device Tree'...The USB lead is working fine.
Has anyone out there had the same experience and successfully ressurected their CDM hardware?
Any advice welcome