Arturia Forums
Harware Legacy versions => Analog Laboratory => Analog Laboratory Technical Issues => Topic started by: Topaz on October 22, 2018, 02:07:49 pm
-
I am trying to configure my BSP to control analog lab using the factory template in AL3.
CC75 (decay) is being blocked from all controllers.
-
Hi Topaz,
What's exactly your issue ? When you say "Factory Template" are you talking about the MIDI controller section in AL3 ?
-
Hi, yes the factory template in AL3 is blocking cc75 (decay)
-
Ok, so in this dropdown list, choose "Default" and then you will have access to MIDI configuration icon and should be able to assign any parameters to the CC you want. ;)
(https://owncloud.arturia.net/s/HNo6RWx5F0sfFyh)
-
The problem with that is the controls over run the BSP where as the Factory template has 15 controls.
Default has 20 controls that overlap the BSP.
-
The problem with that is the controls over run the BSP where as the Factory template has 15 controls.
Default has 20 controls that overlap the BSP.
You don't have to assign all parameters, you can leave some of them free.
As there is no pre-mapped template for BeatStep Pro cause it's not a keyboard, the "default" template is the only solution to edit CC assignation and create your own mapping.
"Factory" template is a pre-mapped template for old "Analog experience" keyboards ( https://fr.audiofanzine.com/clavier-maitre-midi-25-touches/arturia/analog-experience-the-factory/ ), that's why you don't have access to MIDI configuration.
-
No Problem, plogue bidule (sub host) to the rescue.
It can midi learn anything.
cheers