Arturia Forums

DRUMS => Spark => Spark Technical Issues => Topic started by: maddyman on June 08, 2018, 08:44:46 pm

Title: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out
Post by: maddyman on June 08, 2018, 08:44:46 pm
Hi everybody, everytime I start Logic X I get the message:
In order for the Spark controller to work correctly with Spark used plug-in mode. it is necessary to turn off some MIDI connections in your DAW MIDI settings.
Can anyone tell me which and how I should turn off the necessary Midi connections?
I didn't find any details in the user's manual and the plug in seems to be unstable all the time.
Thank you for any advise
Title: Re: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out
Post by: youwokeup on July 10, 2018, 06:15:39 am
  I hope They are listening. 

 I am currently searching for the answer as well.  The font in the "warning" seems to be from the Spark device as Cubase has a different layout.

  Any help is really appriciated.
Title: Re: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out
Post by: terrym on July 12, 2018, 07:24:09 pm
Hi did you try this
https://www.arturia.com/legacy/downloads/support/howto/pdf/Spark/tuto_spark_1.7.1_logic_X.pdf
Title: Re: Spark Creative Drum Machine-Hardware devise- problem with Midi in and out
Post by: artao on September 01, 2018, 06:30:38 am
Basically, turn off ALL MIDI connections to Spark in your DAW.
Spark takes care of that all by itself, and gets confused if you DON'T do that. :D