Arturia Forums

V Collection - Legacy versions => Analog Lab 3 => Analog Lab 3 - Technical issues => Topic started by: Lippenyi on December 07, 2017, 03:56:59 pm

Title: [SOLVED] Piano V2 does not respond to sustain pedal in Analog Lab3
Post by: Lippenyi on December 07, 2017, 03:56:59 pm

Piano V2 does not respond to sustain pedal in Analog Lab3. I`ve double checked with other keyboards in the collection, so my controller definitely does send pedal information and it is working perfectly with the Wurlitzer or the Fender models.

Title: Re: Piano V2 does not respond to sustain pedal in Analog Lab3
Post by: Matt Arturia on December 08, 2017, 09:33:19 am

Hi,

We have an issue with the sustain pedal of Piano V2 and Analog Lab 3. We are currently fixing this issue but there is a simple workaround  : install the demo version of the Piano V2 and then it will work inside Analog Lab 3.

Regards,

Matthieu

Title: Re: Piano V2 does not respond to sustain pedal in Analog Lab3
Post by: lzap on December 09, 2017, 11:27:14 pm

And I have the very same problem here with Roland FP-30 (cont. pedal). This totally kills it, I cannot test pianos :-(

Title: Re: Piano V2 does not respond to sustain pedal in Analog Lab3
Post by: yellowradio on December 10, 2017, 11:26:47 am

Just to check - will there be a new version of Piano V2 with the sustain pedal fix issued soon?
My Arturia Software Centre says I'm using the latest version, but the sustain pedal is not working for me (as of Sunday December 10th).
Pedal works fine on Piano V(1).
Using V6 Collection on Windows 10 if that's relevant.
Many thanks!

Title: Re: Piano V2 does not respond to sustain pedal in Analog Lab3
Post by: lzap on December 11, 2017, 03:41:20 pm

Matt, do I need to do complete V2 installation? I installed Piano V2 standalone only as I do not want to play around with VSTs and plugins just for fun... Does not seem to resolve the issue for me.

Title: Re: Piano V2 does not respond to sustain pedal in Analog Lab3
Post by: pl arturia on December 15, 2017, 03:10:43 pm

Hi,
The problem comes from Analog Lab 3 (and not from the Piano V2).
We have reproduced the issue here, and are currently fixing it, we will release a hotfix soon fixing the problem.

However, installing the Piano V2 standalone only is ok, the workaround should work on your side.

Does the sustain pedal works into Piano V2 in standalone ?
Could you check on Analog Lab 3 using the same Piano preset than the Sustain Pedal is still not working ?

Thanks,
PL

Title: Re: Piano V2 does not respond to sustain pedal in Analog Lab3
Post by: pl arturia on December 22, 2017, 10:27:12 am

Hi all,
We have released today a version 3.1.0.1247 fixing this issue.
PL

Title: Re: [SOLVED] Piano V2 does not respond to sustain pedal in Analog Lab3
Post by: yellowradio on December 22, 2017, 06:23:27 pm

Thanks very much - Piano V2 as part of V Collection 6, within Presonus Studio One, on Windows 10 64-bit, now working fine.