Arturia Forums
Hardware Sequencers => BeatStep Pro => BeatStep Pro - Technical Issues => Topic started by: spike on June 30, 2017, 03:34:30 am
-
After updating...
Sequence 1 does not display the moving white LED step counter and does not display the recorded Green step LEDs when inputting note events.
Switching the Roller/Looper mode does NOT work in every mode.
Only switches with step 9 if you are in control mode.
The random settings are effecting ALL of the tracks even if Current Track is selected.
I have two BSPs and the Green Seq 1 has the problem on only one of them.
They BOTH will not switch the Roller/Looper unless they are in Control mode.
Any solutions to these issues?
-
Hi spike,
Sequence 1 does not display the moving white LED step counter and does not display the recorded Green step LEDs when inputting note events.
That is strange.
- Please make sure you have the latest MIDI Control Center (MCC), otherwise you will corrupt your BSP
- Save all your projects using the MCC
- Do a reset factory on your faulty BSP
- Tell us then if it is ok or not
The random settings are effecting ALL of the tracks even if Current Track is selected.
Please be sure to have the Global randomness at 0. There are 4 randomness settings:
- One for SEQUENCER 1
- One for SEQUENCER 2
- One for DRUM
- + a global one which applies to all
Switching the Roller/Looper mode does NOT work in every mode.
They BOTH will not switch the Roller/Looper unless they are in Control mode.
This is normal as this is the wanted behavior. Have a look here:
http://downloads.arturia.com/products/beatstep-pro/manual/BeatStepPro-CheatSheet.pdf (http://downloads.arturia.com/products/beatstep-pro/manual/BeatStepPro-CheatSheet.pdf)
Best,
Y.
-
I have got the exact same problem. I have done a factory reset and the looper or shift 9 still doesn't work in sequencer 1 and 2.
What should I do from here?
Regards
-
They BOTH will not switch the Roller/Looper unless they are in Control mode.
This is normal as this is the wanted behavior. Have a look here:
http://downloads.arturia.com/products/beatstep-pro/manual/BeatStepPro-CheatSheet.pdf
Best,
Y.
-
Hi,
I knew that was not that roller/arpeggiator mode until you posted your official video in youtube this summer. ???
https://youtu.be/JCViFiSyYyY
Still can enter in roller/arpeggiator mode. Roller just in control mode and arp no idea. :'(
Your endorser is doing some kind of magic. Maybe next update? :-X
Regards.
-
Hi, people.
This is normal as this is the wanted behavior. Have a look here:
http://downloads.arturia.com/products/beatstep-pro/manual/BeatStepPro-CheatSheet.pdf
Best,
Y.
It is not. I've seen that already.
BeatStep Pro
V 2.0.0.2
Bug fixes
Chains are properly handled in reverse mode
Program changes are now properly handled when "Wait to load pattern" is off
V 2.0.0
New features
SHIFT + Step 2 = Clear steps in selected track
SHIFT + Step 9 (in Controller Mode) = Switch between Roller and Looper, affects Controller Mode and the three sequencers. Roller in melodic mode is an arpeggiator that plays notes in the order where they were pressed.
SHIFT + Step 14 (Controller Mode) = Wait to load pattern
SHIFT + Step 15 (Controller Mode) = Global Tempo
SHIFT + Step 16 (Drum Mode) = Polyrhythm
BeatStep Pro is Synchronizable with Volcas
Create longer notes in the drum sequencer using Ties
Scales are now applied after the sequence
Ability to enter notes in melodic sequencer by hitting a pad then tapping one or multiple steps.
.....
BR.
-
Sorry people, I do not understand your issue. I think there is a misunderstanding here.
Y.