Arturia Forums

DRUMS => Spark => Spark Users Community => Topic started by: BeatniCk on March 31, 2017, 03:36:24 pm

Title: Stop effect with control pad
Post by: BeatniCk on March 31, 2017, 03:36:24 pm

Hello everybody,

I'm a new user of the SparkLE and really enjoy this maschine.
I'm also french, which does explain my bad english ;)... sorry for that.

I have a "problem". In the manuel, it's written to stop the effect with when using the pad, you have to choose the "touch" option on the "filter" for example.
This is working for the global filter, but on the instrument filter, this is not working... Any Idear ??

Thanks :)

Title: Re: Stop effect with control pad
Post by: Terrym on March 31, 2017, 04:15:34 pm

Hi .without looking at the sparkle you can only latch the global filter only.   i will double check though




Terrym

Title: Re: Stop effect with control pad
Post by: BeatniCk on March 31, 2017, 04:24:55 pm

Hi Terrim, actually Latch and touch are working on the global effect.
On the instrument effect, also the 2 options are available by right clicking, but the "touch" doesn't work.

Title: Re: Stop effect with control pad
Post by: Terrym on March 31, 2017, 06:02:33 pm

In the manual there no mention of instruments with latch or touch .see the screen shot.



terrym

Title: Re: Stop effect with control pad
Post by: BeatniCk on March 31, 2017, 06:07:22 pm

Humm right... In the Opposite, the option is visible inside the software... strange...

Life is strange sometimes...

See u

Title: Re: Stop effect with control pad
Post by: artao on April 29, 2018, 04:38:34 am

Quote from: BeatniCk on March 31, 2017, 03:36:24 pm

Hello everybody,

I'm a new user of the SparkLE and really enjoy this maschine.
I'm also french, which does explain my bad english ;)... sorry for that.

I have a "problem". In the manuel, it's written to stop the effect with when using the pad, you have to choose the "touch" option on the "filter" for example.
This is working for the global filter, but on the instrument filter, this is not working... Any Idear ??

Thanks :)

Okay, if I understand you correctly:
That bottom button on the controller/software, for the touch pad.
NORMALLY it functions as a repeat/flam.
HOWEVER! When you keep hitting the button, it then changes to a few effects that apply ONLY to the current instrument you have selected. I've messed myself over more than a few times by forgetting to select the instrument I wanted that to apply to.
At any rate, THAT is how you get effects to apply to ONLY certain instruments. But still only one at a time.