Arturia Forums
Hardware Instruments => MatrixBrute => MatrixBrute - Tips & Tricks => Topic started by: khidr on January 18, 2017, 06:09:07 pm
-
Hi All,
I compiled a list of the CC# values of the MatrixBrute. The formatting could use some improvement but I hope you can put it to good use. I've added HTML and Excel versions as an attachment in case you want to print and add it to your manual. (It's not an official Arturia publication..but I hope they will add it to future versions of the manual)
Matrix Brute CC# values
Parameter name CC# Value
VCO 1
VCO 1 fine 65
VCO 1 course 66
VCO 1 subwave select 67
VCO 1 sub amplitude 9
VCO 1 saw amplitude 10
VCO 1 ultrasaw 68
VCO 1 pulse 12
VCO 1 pulse width 69
VCO 1 triangle 13
VCO 1 triangle metalizer 70
VCO 2
VCO 2 fine 71
VCO 2 course 72
VCO 2 subwave select 73
VCO 2 sub amplitude 14
VCO 2 saw amplitude 15
VCO 2 ultrasaw 74
VCO 2 pulse 16
VCO 2 pulse width 75
VCO 2 triangle 17
VCO 2 triangle metalizer 76
VCO 3
VCO 3 course 22
Audio Modulation
VCO1>VCO2 77
VCO1<VCO3>VCO2 78
VCF<VCO3>VCF2 79
VCO1<noise>VCF1 80
Wheels
bend range 119
Mixer
VCO 1 level 18
VCO 2 level 19
VCO 3 level 20
Noise level 21
External input level 89
VCF 1 Steiner Filter
Drive 81
Cutoff 23
Resonance 83
Brute Factor 82
Env Amount 24
Steiner Out 7
VCF 2 Ladder Filter
Drive 85
Cutoff 25
Resonance 87
Brute Factor 86
Env Amount 26
Ladder Out 8
Master Cutoff 27
LFO 1
LFO 1 phase 90
LFO 1 rate 91
LFO 2
LFO 2 delay 92
LFO 2 rate 93
ENV 1 (VCF)
ENV 1 (VCF) velocity 94
ENV 1 (VCF) attack 102
ENV 1 (VCF) decay 103
ENV 1 (VCF) sustain 28
ENV 1 (VCF) release 104
ENV 2 (VCA)
ENV 2 (VCA) velocity 95
ENV 2 (VCA) attack 105
ENV 2 (VCA) decay 106
ENV 2 (VCA) sustain 29
ENV 2 (VCA) release 107
ENV 3
ENV 3 delay 108
ENV 3 attack 109
ENV 3 decay 110
ENV 3 sustain 30
ENV 3 release 111
Analogue Effects
Delay time 112
Regeneration 113
Tone/Rate 114
Width/Depth 115
Dry/Wet 31
Sequencer
Rate 116
Swing -
Gate -
Master Controls
fine tune -
headphone volume -
Volume -
-
Hi,
Thanks for the list !
This information is actually available in the manual (p 50), but as a diagram; so a compiled list like yours -which some might prefer- will still be useful !
-
Hi,
Thanks for the list !
This information is actually available in the manual (p 50), but as a diagram; so a compiled list like yours -which some might prefer- will still be useful !
Hi Thierry,
Thanks for responding. It seemed like a good idea to add the info in this form. I found the info in the manual very hard, if not impossible, to read.
I'll try to add some info about how to use cc# controllers to control the MatrixBrute from Ableton. Using them from your DAW can add a lot of Pizzaz to your music.
-
Many thanks khidr - very useful
I took your details and a made a '1 - Pager', so i could print it out and stick it on my wall
-
thank you khidr!
-
This is ace thanks - going to make mapping this into bitwig a lot easier ;)
-
Many thanks khidr - very useful
I took your details and a made a '1 - Pager', so i could print it out and stick it on my wall
Thanks, to both the OP for creating the list and this one pager, great info and easy to read ;)