Arturia Forums

Software Instruments => SEM V2 => SEM V2 - Technical Issues => Topic started by: jeffbart on July 02, 2016, 09:43:13 am

Title: Filter mode 'notch' knob current value less info than before.
Post by: jeffbart on July 02, 2016, 09:43:13 am

SEM v1 Filter mode knob current value would show you % mix/ratio of LP to notch to HP. Very informative!
V2 shows you a range from 0.000 to 1.000, which doesn't really tell you too much.
Could it be changed to do the same as V1?

cheers Jeff