Arturia Forums

Controllers => KeyLab => KeyLab Technical Issues => Topic started by: joelhof on June 04, 2016, 06:04:23 am

Title: Pads sending on 2 channels in split mode
Post by: joelhof on June 04, 2016, 06:04:23 am
This problem was reported on in September of 2013 and there was no response to it.

Keylab 49
FW ver 1.33
MCC ver

In split mode the pads send on the channel they are set for (default=10) AND on channel 1.I have the pads set for note toggle. If I change the channel to anything other than 1, I get that specific channel and channel 1. If I set the pads to channel 1, I get two channel 1 note on events ... The problem is not there when I turn split mode off. I have verified with MCC view midi and also with Midi-Ox.