Arturia Forums
Hardware Instruments => MiniBrute 2 => MiniBrute 2 - Technical Issues => Topic started by: Sedrok on June 27, 2021, 03:53:47 am
-
Hi All!
My arpeggiator does not work properly.
When the "hold" mode is off, when I press let's say 3 keys, the arpeggiator will play only once the 3 notes, even though I keep pressing the keys. So I turn the "hold" mode on.
The hold mode will play receptively only the last key that I pressed, so it does not play any arpeggio.
It plays the arpeggio only once, when I press the keys, and then stuck on one note only, it's very frustrating...
Anyone had this issue before?
Thanks for help!
-
Hi,
have you found any solution for that problem?
I'm having the exact same problem.
I also made a hardware reset which hadn't helped solving the issue.
Cheers, hohu67
-
I'm experiencing the same thing, but only when I have an external midi sequencer connected to my minibrute's midi in. I have turned off the midi sync out option on my external sequencer, so I don't know what sort of midi data could be interfering with the arpeggiator's normal behavior.
Hi All!
My arpeggiator does not work properly.
When the "hold" mode is off, when I press let's say 3 keys, the arpeggiator will play only once the 3 notes, even though I keep pressing the keys. So I turn the "hold" mode on.
The hold mode will play receptively only the last key that I pressed, so it does not play any arpeggio.
It plays the arpeggio only once, when I press the keys, and then stuck on one note only, it's very frustrating...
Anyone had this issue before?
Thanks for help!
-
[Solved] Midi soft thru on external sequencer was confusing the minibrute. Oops. If you are connected to any other hardware perhaps this is the issue.