Arturia Forums
Software Effects => Comp TUBE-STA => Compressors => Comp TUBE-STA - Technical Issues => Topic started by: DrRhythm2030 on June 15, 2021, 06:12:00 am
-
When turning the knob for the High Pass or Low Pass filters, the callouts are not appearing as Hz or KHz, but instead are displaying decimals. For example, if I turn the High Pass Filter to 80Hz, the callout dispays "0.388". With that in mind, I have two questions:
What does "0.388" mean?
And, if the knob is turned to 80Hz, are you actually high passing at 80, or 388Hz?
I am assuming that the callout is simply incorrect, but could you please confirm?
I should mention that this problem is not occurring with Comp FET-76, incidentally.
Thanks in advance for your assistance on this one.
-
When turning the knob for the High Pass or Low Pass filters, the callouts are not appearing as Hz or KHz, but instead are displaying decimals. For example, if I turn the High Pass Filter to 80Hz, the callout dispays "0.388". With that in mind, I have two questions:
What does "0.388" mean?
And, if the knob is turned to 80Hz, are you actually high passing at 80, or 388Hz?
I am assuming that the callout is simply incorrect, but could you please confirm?
I should mention that this problem is not occurring with Comp FET-76, incidentally.
Thanks in advance for your assistance on this one.
I just installed the latest version, and this is still a problem.