Arturia Forums
Hardware Sequencers => KeyStep Pro => KeyStep Pro - Technical Issues => Topic started by: scab righteous on May 18, 2021, 01:49:55 am
-
The manual says in section 7.3 that you can choose which output to send midi clock to.
I want to only send it to midi out 1 and not midi out 2 - however my keystep pro has no such options?
Then in section 9 of the manual, there is a repeat of the settings, and it doesn't show any way to select a midi out for clock.
I also checked the midi control app, and did not see a way to set midi clock to only one of the outputs.
Can you select the output for clock?
What is section 7.3 on about?
-
True!
this is what the manual says:
7.3. Sync/Clock and Reset Outputs
In the Sync menu, you can select whether the clock and/or transport signals will be sent via each of the following outputs:
• USB
• MIDI Out 1
• MIDI Out 2
• Clock Out
I want it! MIDI 1 For clocking and MIDI 2 clean for notes only
-
Not possible indeed... I added this as a feature request + notified the manual writer.
Thanks
Adrien