Arturia Forums

Hardware Sequencers => KeyStep Pro => KeyStep Pro - Technical Issues => Topic started by: Guustaaf on January 21, 2021, 10:02:46 am

Title: How do I start the Keystep Pro in bootloader mode?
Post by: Guustaaf on January 21, 2021, 10:02:46 am

Please tell me.

Title: Re: How do I start the Keystep Pro in bootloader mode?
Post by: artao on January 21, 2021, 08:59:41 pm

If I understand right what you mean, I'm pretty sure you don't do that. The MIDI Control Center handles all that sort of stuff directly.

Title: Re: How do I start the Keystep Pro in bootloader mode?
Post by: DingLuKai on January 22, 2021, 11:49:30 am

- Power the keystep pro off
- Plug a cable from the clock input to the reset out
- Power the unit
- Remove one of the two end of the cable.
- Open the Midi Control Center and click on the Firmware Revision button
- Click on "Upgrade"
- Select the firmware file and click on "Open"
- Click on "OK" to start the upgrade process.