Arturia Forums

Hardware Sequencers => KeyStep => Keystep Technical questions => Topic started by: karota on January 08, 2021, 11:00:55 am

Title: When I work in Sync in Mode Keystep never stop
Post by: karota on January 08, 2021, 11:00:55 am

Hi!

I've just updated the firmware of my Keystep to the latest version, but now when I sync my arturia keystep as a slave, by using a volca drum as master, I can't never stop the arpeggiator. Obviously I set the sync In/Out settings from the Arturia Midi Center as '1 Pulse (Korg)'.

How could I fix this?

Thank you so much!!!

Title: Re: When I work in Sync in Mode Keystep never stop
Post by: Gabriel Black on March 25, 2021, 10:13:24 pm

Dude, I've figured it out just a moment ago.

Install MIDI Control Center.
Now... the manual tells you to set the sync clock into 1pulse (korg) mode. That's all good. But not enough.
Sync clock must be "on clock"

Now, here's where the problem lies. Keystep receives the pulse and syncs to it, but it is set to start playing whenever it gets the pulse.
That's why your stuff keeps starting all over again.

What you need to do is to scroll down to the "arm to start" option and switch it to "on".
Worked for me.

I hope I helped.

Cheers!