Arturia Forums

Software Instruments => Vocoder V => Vocoder V - Technical Issues => Topic started by: pwsilzer4 on December 27, 2020, 11:02:09 pm

Title: Voice input only comes in the left channel
Post by: pwsilzer4 on December 27, 2020, 11:02:09 pm
Hey guys!

Love the new vocoder plugin.

For some reason when I use the voice input, the voice only comes through the left channel.  I can tell because when I solo the voice, I hear it only in the left channel. It's the same thing no matter what preset I use.

I use Pro Tools and I've followed the exact directions for set up (key input). Totally baffled!

Would appreciate any help / advice.

- P4


Title: Re: Voice input only comes in the left channel
Post by: MoogDX7 on January 05, 2021, 07:42:48 am
Same here in Pro Tools, very annoying.
Title: Re: Voice input only comes in the left channel
Post by: Germain.arturia on January 05, 2021, 02:11:22 pm
Hi ,you're right, unfortunately i managed to reproduce your issue.
I also tried some routing tricks but it didn't solve this.
logged the issue in our bugtracker in the meantime.
sorry for the inconvenience,
best regards,
Title: Re: Voice input only comes in the left channel
Post by: LBH on January 05, 2021, 06:41:26 pm
Hi Germain,

In standalone mode in my demo version i have found that if i select a stereo input, then only the left channel is sounding.
If i select only Left as input (a mono signal), then there is sound in both channels.

The Pitch Tracking in Vocoder V according to the manual only work with a monophonic signal.

Also the manual say this when using samples: "(The samples can be stereo, but they will be summed to mono prior to being vocoded.)".
So shall we understand, that this also should be the case when using a stereo signal for Voice input mode?
Title: Re: Voice input only comes in the left channel
Post by: MoogDX7 on January 07, 2021, 05:20:20 am
Hi Germain,

Thanks for looking in to this.