Arturia Forums

DRUMS => Spark => Spark Users Community => Topic started by: klynton on April 01, 2020, 07:41:07 am

Title: unsupported project sample rate
Post by: klynton on April 01, 2020, 07:41:07 am
Please help if you can
Title: Re: unsupported project sample rate
Post by: LBH on April 01, 2020, 02:03:13 pm
Hi and welcome to Arturia forums.

Which samplerate do you use in Spark audio and midi settings? Do you have issues with all sample rate settings i Spark?
Does your samplerate settings match? Like Spark, Host, Soundcard settings. Make sure they match.
Do you get the error messages with all projects? If not, then perhaps it's a project issue.
Title: Re: unsupported project sample rate
Post by: klynton on April 03, 2020, 04:01:59 am
HELLO

MANY THANKS FOR YOUR PROMPT RESPONSE...

I am a novice...I do not know how to find out which sample rate I use and I do not know how to adjust it.

Would this be done within the Spark2 program?

Where do I locate and adjust the Sample Rates?

The samples I am using came with the Spark2 ...

Am I missing something here?

thanks
Title: Re: unsupported project sample rate
Post by: LBH on April 03, 2020, 01:11:53 pm
Your welcome.

For the standalone mode - Have a look in the Spark2 manual section "6.1.2 Configuration of Audio & MIDI settings" on page 83.
You can find the manual here: https://www.arturia.com/products/sparkle/resources
Try to set the samplerate to 44100 or perhaps 48000 Hz in the "Show advanced settings".
Also be sure your soundcard actually change to that setting.

If you use Spark in a DAW, then you shall set the samplerate for the DAW.