April 16, 2024, 03:31:38 pm
Welcome, Guest. Please login or register. 
News:

Arturia Forums



« previous next »
Pages: [1]

Author Topic: Signal below 12 o'clock  (Read 1699 times)

JiggyWig

  • Apprentice
  • Apprentice
  • *
  • Posts: 8
  • Karma: 0
Signal below 12 o'clock
« on: January 26, 2016, 10:02:26 pm »
My microbrute gives no signal from any of the waveforms until turned past the 12 o'clock centre position. Is this expected behaviour? I ask because it seems odd.
Logged

Bacon

  • Jr. Member
  • **
  • Posts: 78
  • Karma: 11
Re: Signal below 12 o'clock
« Reply #1 on: January 27, 2016, 04:52:59 pm »
Definitely not expected behavior. You should get a signal through virtually all of the knobs' travel, and past the 12 o' clock position the oscillator output should start to overdrive the filter.
Logged

JiggyWig

  • Apprentice
  • Apprentice
  • *
  • Posts: 8
  • Karma: 0
Re: Signal below 12 o'clock
« Reply #2 on: January 28, 2016, 12:43:05 am »
Thanks. I've just rechecked this just now, and I am getting output again. I'm going to keep an eye on this.
Logged

JiggyWig

  • Apprentice
  • Apprentice
  • *
  • Posts: 8
  • Karma: 0
Re: Signal below 12 o'clock
« Reply #3 on: January 28, 2016, 01:05:25 am »
Okay, so it turns out I'm an idiot; I had left a noise gate in one of the signal chains with the threshhold set a little too aggressively (I'm getting quite a lot of noise in my signal at the moment for some reason).

Live and learn....

Logged
Pages: [1]
« previous next »
 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines