March 29, 2024, 07:44:44 am
Welcome, Guest. Please login or register
News:

Arturia Forums



Author Topic: MicroBrute to play both speakers  (Read 3177 times)

JST1

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
MicroBrute to play both speakers
« on: October 04, 2015, 07:09:53 pm »
Hey Users,
I just bought the Microbrute - and i do love it!
I dont know if there is something i've totally missed, but when i plug my brute to my behringer DDM400 mixer which i connected through to my KRK Rokit 5 it only plays the Left speaker.
I Connect the Brute with minijack to phono in channel 3 Line on my mixer.
Is there any way to connect it through the mixer and play both speakers?

Thank you, Julius

Filterseducer

  • Jr. Member
  • **
  • Posts: 60
  • Karma: 240
Re: MicroBrute to play both speakers
« Reply #1 on: October 05, 2015, 10:15:18 am »
hi,

MB has a mono output. Phono are stereo ins, so choose a mono channel on your mixer, center pan and you'll hear a mono signal coming out from both speakers.
Also, if possible use a mono jack cable to plug your synth into a line-in on your mixer. If still using minijack to RCA's everything has to be mono (jack to minijack adapter + RCA's). MB can add some noise to its main output if volume knob is not set to max, so crank it up and then trim your mixer channel to avoid peaking.
Hope this helps
« Last Edit: October 05, 2015, 12:01:51 pm by Filterseducer »

 

Carbonate design by Bloc
SMF 2.0.17 | SMF © 2019, Simple Machines